820 s-off and repair

hello. htc 820 s-off and repair with xtc clip
xtc clip sd card connect telephone

Img 8385 – H?zl? Resim

not s-off nad repair

direck mode xtc clip log

Reading information…
Using Fastboot mode…
Reading common information
(bootloader) version: 0.5
(bootloader) version-bootloader:
(bootloader) version-baseband: 01.01.010_U10305041_08.01.50512
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.10.401.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: CC524YC02314
(bootloader) imei: 357586060284368
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: a51_ul
(bootloader) platform: hTCBmsm8939
(bootloader) modelid: 0PFJ40000
(bootloader) cidnum: HTC__M27
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: da038a09
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) mfg-name: 1001
Execution time is 9(ms)
all: Done!
Reading secure flag information
… (bootloader) secure_flag: 3
Execution time is 0(ms)
Reading CID information
… (bootloader) cid: HTC__M27
Execution time is 0(ms)
Reading MEID information
… (bootloader) meid: 00000000000000
Execution time is 0(ms)
Read information completed.

… (bootloader) SecuritySDInit: counter = 6
(bootloader) a51dtul_init_sd, SD card already power on
(bootloader) a51dtul_init_sd, SD card io already power on
(bootloader) sdhci_open: id=0
(bootloader) Initializing MMC host data structure and clock!
(bootloader) mmc slot#2 clock enabled
(bootloader) sdhci_set_clock: slot 2, freq 192000000
(bootloader) GPLL0 is enabled
(bootloader) clock_update_cfg_sd is done
(bootloader) sd clock set done
(bootloader) sdhci_set_bus_width: bus width 0
(bootloader) sdhci_clk_supply: freq 400000
(bootloader) Error: Command never completed
(bootloader) Error: Command timeout error
(bootloader) Error: Command completed with errors
(bootloader) The response for CMD8 does not match the supplied value
(bootloader) Decoded CID fields:
(bootloader) Manufacturer ID: 7f
(bootloader) OEM ID: 0x0
(bootloader) Product Name: 5270
(bootloader) Product revision: 5.2
(bootloader) Product serial number: B4E
(bootloader) Manufacturing date: 2 2015
(bootloader) sdhci_clk_supply: freq 50000000
(bootloader) sdhci_set_bus_width: bus width 1
(bootloader) Done initialization of the card
(bootloader) erase_grpsize: -1921008524
(bootloader) erase_grpmult: -1921008652
(bootloader) wp_grpsize: 1
(bootloader) wp_grpen: 1
(bootloader) perm_wp: 0
(bootloader) temp_wp: 0
(bootloader) [Tuxera][Error] No exFAT partition found
Operation finished
not s-off autorized help pls.