Can’t init EMMC, Reason: CARD Data FIFO Timeout Error

just show this error on any EMMC
by emate & direct pinout on mainboard


Can’t init EMMC, Reason: CARD Data FIFO Timeout Error
Check Data Line!

i cleaned 20pin socket but that was vain

please help me:(:(:(

Can’t init EMMC, Reason: CARD Data FIFO Timeout Error

Quote:

Z3X EasyJtag Software ver. 2.1.1.1
Loading eMMC Addon Firmware… IO: 1800 mV
Box S/N: 0BFF6019B312B8AF, ,FW Ver.: 01.55
CMD Pullup Level:1680 mV
CMD Active Level:1763 mV
Box IO Level:1800 mV
CLK Rate:21000 khz
HiPower™ mode is ON!
eMMC Device Information
EMMC CID : 1501004B4A5330304D0307EF64EC5050
EMMC CSD : D02701320F5903FFF6DBFFE78A404056
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 05/2013 Rev.0x3
EMMC NAME: KJS00M , S/N: 133129452
EMMC NAME (HEX): 4B4A5330304D00
Can’t init EMMC, Reason: CARD Data FIFO Timeout Error
Check Data Line!

Done.


Quote:

Z3X EasyJtag Software ver. 2.1.1.1
Loading eMMC Addon Firmware… IO: 1800 mV
Box S/N: 0BFF6019B312B8AF, ,FW Ver.: 01.55
CMD Pullup Level:2114 mV
CMD Active Level:2444 mV
Box IO Level:1800 mV
CLK Rate:21000 khz
HiPower™ mode is ON!
eMMC Device Information
EMMC CID : 90014A4834473164048601A3FEE8614A
EMMC CSD : D02701320F5903FFFFFFFFE78A4040E2
EMMC Manufacturer ID: 0090 , OEM ID: 014A
EMMC Date: 06/2014 Rev.0x86
EMMC NAME: H4G1d , S/N: 27524840
EMMC NAME (HEX): 48344731642000
Can’t init EMMC, Reason: CARD Data FIFO Timeout Error
Check Data Line!

Done.