before write flash device in condition hang on logo EVERCOSS
Flash files count is :11
Action : Firmware update.
Selected Acer: Liquid Z110
Phone must be off with battery inside.
Please insert USB cable now…
Detected : MTK USB Port (COM11)
Phone detected…Please wait
Sending DA agent, please wait…
EMMC: (28Gb+4096Mb) HYNIX 0x483447316404
EMMC FW VERSION: 86:00:00:00:00:00:00:00
BOOT STYLE : EMMC BOOT
Detecting high speed port, wait……
If driver not installed, install high speed port driver.
Detected : DA USB VCOM Port (COM12)
After flash this firmware need to perform some aditional steps
1.Reinsert battery, keep VOL- and power on untill phone will come in factory mode
2.Select line EMMC, and after press home button.
3.Wait untill phone will restart and will stuck on logo(leave for 1 min in this stage).
4.If phone not power on, reinsert battery and perform direct unlock.
If repair fail, please contact us or report in forum to provide help.
Wait untill phone will start charging.
try flash with sptool same error