Download Package From Above Link And Extract it [rar file include with michfood-Port-CWM-184.108.40.206-BM,MtkDroidTools ,SP Flash Tool]
Now lets Begin Step by step.
-open MtkDroidTool and Connect Device with usb (USB Debugging Must Be ON under Settings-Developer option)once MtkdroidTool popup Device info,click on ”Blocks Map”
-Now under 2nd windows click ”Create scatter File”
-MtkdroidTool Popup Windows For Scatter file Saving Path,Save Scatter Where you want.
-Now open Sp-tool and load scatter which is read by MtkdroidTool,”Click Raed Back"",”Click Add” and Finaly Double Click On ”N/A”And Give path to Save Stock recovery…[Rename ROM_0 to recovery.img]
-with new sptool popup windows Give ”Read Back block start Address and Length”[Address you will get By MtkdroidTool ”’Blocks Map”]
-After Finish this Hit ”OK” Tab And ”press Read Back” Tab on sp-tool. Switch Off Phone,And reconnect with Usb cable [Phone Must be Off Condition] soon sp-tool start to reading STOCK Recovery.
-Now Extract ”michfood-Port-CWM-220.127.116.11-BM.7z” and Move Folder to ”C” Drive,copy stock recovery and past under C Drive michfood-port folder….
-here you get ”6030.Exe” run it by Admin.[Anti virus Must Be Off] it will ask for  Auto port  Manual port,select option 2 ”Manual port” and Hit Enter.Here another windows ask for mtd or Emmc partition,select ”’Emmc Partition”…
-After Few Process Your CWM recovery ready [ under C Drive-michfood-Port-CWM-18.104.22.168-BM-Ported-CWM-recovery]
-Now open Sp-tool and load Same scatter which is read by mtkdroidTool Early and just Double click on ”recovery” and give path for CWM recovery From C Drive….
-reconnect phone again with USB Cable [Off Condition] Hit Download TAB and let sp-tool to finish Flash CWM recovery.img.
-DONE…your MTK Android Device Now Have CWM recovery…!:)