G355h imei 0000000

IMEI REAPIRED BUT STILL,,IMEI 0000000000

Welcome to Octoplus/Octopus Box Samsung software version 2.2.0
———————————————————————————–
To connect GT-I9305 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Developer options.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "MODEM" value.
8. Go to "Qualcomm USB Settings".
9. Select "RNDIS+DM+MODEM".
10. Enter "*#9090#" number.
11. Select DM/DUM over HS-USB.
12. Press Home button.
13. Go to dial window.
14. Press "Read Info" in software.
———————————————————————————–
To connect GT-I9305 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Developer options.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "MODEM" value.
8. Go to "Qualcomm USB Settings".
9. Select "RNDIS+DM+MODEM".
10. Enter "*#9090#" number.
11. Select DM/DUM over HS-USB.
12. Press Home button.
13. Go to dial window.
14. Press "Read Info" in software.
———————————————————————————–
To connect GT-I9305 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Developer options.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "MODEM" value.
8. Go to "Qualcomm USB Settings".
9. Select "RNDIS+DM+MODEM".
10. Enter "*#9090#" number.
11. Select DM/DUM over HS-USB.
12. Press Home button.
13. Go to dial window.
14. Press "Read Info" in software.
———————————————————————————–
To connect SM-G355H phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
———————————————————————————–
Platform: Samsung Android
Selected port: COM1
Selected model: SM-G355H
Proper android device not found. Make shure that "USB debug" option
on the device is turned on.
Write IMEI failed
———————————————————————————–
Platform: Samsung Android
Selected port: COM55
Selected model: SM-G355H
Proper android device not found. Make shure that "USB debug" option
on the device is turned on.
Write IMEI failed
———————————————————————————–
Platform: Samsung Android
Selected port: COM55
Selected model: SM-G355H
Proper android device not found. Make shure that "USB debug" option
on the device is turned on.
Write IMEI failed
———————————————————————————–
Platform: Samsung Android
Selected port: COM55
Selected model: SM-G355H
Please, press "OK" button on the phone to allow USB debugging..
Detected phone model: SM-G355H
Firmware compiled date: Thu Jun 19 21:04:11 KST 2014
PDA version: G355HXXU0ANFC
CSC version: G355HOXE0ANFC
SW version: G355HXXU0ANFC
Phone IMEI: 000000000000000
Android version: 4.4.2 (KOT49H)
Checking Root:
Phone is Rooted.
Old IMEI A: 000000000000000
New IMEI A: 3534554466667699
Repairing IMEI. Please wait…
Repairing network. Please wait, this can take some time…
Phone will restart now. Please don’t disconnect cable!
IMEI successfully repaired.
To finish the operation, please restart the phone via phone’s menu.