g900w8 unlock issue

G900w8 after unlock still locked……

Welcome to Octoplus/Octopus Box Samsung software version 2.2.5
———————————————————————————–
To connect GT-N7100 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Developer options.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Connect usb cable to phone.
6. Go to dial window.
7. Enter *#9090# number.
8. Set speed to 115200.
9. Go to dial window.
10. Enter "*#7284#" number.
11. Set "UART" radio button to "MODEM" value.
12. Set "USB" radio button to "PDA" value
13. Press "Read Info" in software.
———————————————————————————–
To connect SM-N900W8 phone you have to perform the following
steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Restart phone.
11. Press "Read Info" in software.
———————————————————————————–
Platform: Samsung Android
Selected port: COM1
Selected model: SM-N900W8
Reading info…
Mode: Normal
Firmware compiled date: Jan 28 2016
Firmware compiled time: 23:00:00
Firmware released date: Apr 9 2016
Firmware released time: 15:32:17
SW Version: MPSS.DI.2.0.1.c2-00201-M8974AAAAANRZM-1
Please, press "OK" button on the phone to allow USB debugging..
Warning: Selected model (SM-N900W8) differs from the detected one
(SM-G900W8)!
If you want select (SM-G900W8) as (SM-N900W8) model, please
check "manual select".
Unlocking phone…
Phone will restart now. Please don’t disconnect cable!
Phone is successfully unlocked
To finish the operation, please restart the phone via phone’s menu.
Performed by 2.2.5 software version
———————————————————————————–
Platform: Samsung Android
Selected port: COM1
Selected model: SM-N900W8
Phone was not found on the selected port!
Searching for USB diagnostic port…
Connecting to phone on COM184
Mode: Normal
Phone model: SM-N900W8
Firmware compiled date: Jan 28 2016
Firmware compiled time: 23:00:00
Firmware released date: Apr 9 2016
Firmware released time: 15:32:17
Phone IMEI: 353021-07-043482-3
SW version: MPSS.DI.2.0.1.c2-00201-M8974AAAAANRZM-1
Performed by 2.2.5 software version
———————————————————————————–
Platform: Samsung Android
Selected port: COM184
Selected model: SM-N900W8
Reading info…
Mode: Normal
Firmware compiled date: Jan 28 2016
Firmware compiled time: 23:00:00
Firmware released date: Apr 9 2016
Firmware released time: 15:32:17
SW Version: MPSS.DI.2.0.1.c2-00201-M8974AAAAANRZM-1
Warning: Selected model (SM-N900W8) differs from the detected one
(SM-G900W8)!
If you want select (SM-G900W8) as (SM-N900W8) model, please
check "manual select".
Unlocking phone…
Phone will restart now. Please don’t disconnect cable!
Phone is successfully unlocked
To finish the operation, please restart the phone via phone’s menu.
Performed by 2.2.5 software version
———————————————————————————–
To connect SM-G900W8 phone you have to perform the following
steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Restart phone.
11. Press "Read Info" in software.
———————————————————————————–
Platform: Samsung Android
Selected port: COM184
Selected model: SM-G900W8
Reading info…
Mode: Normal
Firmware compiled date: Jan 28 2016
Firmware compiled time: 23:00:00
Firmware released date: Apr 9 2016
Firmware released time: 15:32:17
SW Version: MPSS.DI.2.0.1.c2-00201-M8974AAAAANRZM-1
Detected phone model: SM-G900W8
Firmware compiled date: Sat Apr 9 16:21:16 KST 2016
PDA version: G900W8VLU1DPD3
CSC version: G900W8OYA1DPD3
SW version: G900W8VLU1DPD3
Phone SN: RV8G70CS89R
Android version: 6.0.1 (MMB29M)
Country: Canada
HW platform: msm8974
HW Chip: MSM8974PRO
HW Modem: MSM8974PRO
Codename: kltevl
Checking Root:
Unlocking phone…
Phone will restart now. Please don’t disconnect cable!
Phone is successfully unlocked
To finish the operation, please restart the phone via phone’s menu.
Performed by 2.2.5 software version