G920T FRP Bypass

I used the ENG_BOOT_G920T_4_PE1 to drop the sboot and it passed with odin, when I tried to go into octoplus and remove the FRP, I get a fail. I even tried to use the sboot that is on the support forum, I also got a fail. See logs below. The phone is an S6 Tmobile G920T running Marshmallow G920TUVU4EPF1.

Welcome to Octoplus/Octopus Box Samsung software version 2.3.6
———————————————————————————–
To connect SM-G920T phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
Selected firmware file: SBOOT_G920T_OJ7.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-G920T into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section…
BOOTLOADER section has been written successfully.
Writing Firmware Failed
Performed by 2.3.6 software version
———————————————————————————–
Platform: Samsung Android
Selected port: COM21
Selected model: SM-G920T
To put SM-G920T into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Searching for a phone. Please wait…
Phone found.
Initializing..
Resetting FRP lock..success
Resetting EE lock..success
Resetting Samsung Account lock..
Operation was failed!
Performed by 2.3.6 software version