GT-I9190 Repair imei done


REPAIR INSTRUCTIONS:
Repair IMEI/Serial/BT/WiFi/Product Code:
1. Power on the phone.
2. Type *#0808# and select ‘DM+MODEM+ADB’.
3. Reboot phone.
4. Connect USB cable, install drivers if needed.
5. Select Samsung diagnostic port in port settings.
6. Press ‘Reset MSL’ button to deactivate security.
7. Wait till phone reboot.
8. Tap 7 times on ‘Build number’ in ‘Settings’-‘About phone’ to enable ‘Developer options’,
go to ‘Settings’-‘Developer options’ and enable ‘USB debugging’.
9. Select device in ADB settings.
10. Fill values what you need to repair.
11. Press ‘Repair’ button.

Reset EFS, Disable Factory Mode:
Phone must be rooted!
If the software can’t root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on ‘Build number’ in ‘Settings’-‘About phone’ to enable ‘Developer options’,
go to ‘Settings’-‘Developer options’ and enable ‘USB debugging’.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press ‘Reset EFS’ if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.
6. If you have yellow table on your device screen, then press ‘Disable Factory Mode’ button.

Wipe EFS/NVM:
If you have ‘IMEI null/null’ or ‘Phone baseband unknown’ errors,
Then you can try to repair this errors with this function.
Phone must be rooted!
If the software can’t root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on ‘Build number’ in ‘Settings’-‘About phone’ to enable ‘Developer options’,
go to ‘Settings’-‘Developer options’ and enable ‘USB debugging’.
3. To use ‘Auto backup/restore QCN’ function (recommended):
Type *#0808# and select ‘DM+MODEM+ADB’.
Type *#9090# and select ‘DM/DUN over HSIC’.
Or you can disable this function and use ADB only.
4. Connect the phone to PC with USB cable, install drivers if needed.
5. Select device in ADB settings.
6. Choose diagnostic port in port settings if ‘Auto backup/restore QCN’ is not skipped.
7. Press ‘Wipe EFS/NVM’ button.

Operation: Repair
Selected model: GT-I9190
Selected port: COM103 SAMSUNG Mobile USB Serial Port
Software version: 24.2

Waiting ADB device…
Please, allow USB debugging on phone… OK
Reading phone info…
Model: GT-I9190
Android version: 4.4.2
Product code: Not Active
Phone version: I9190UBUCOD1
PDA version: I9190UBUCOD1
CSC version: I9190JDICOD1
CSC country code: JAMAICA
CSC sales code: JDI
HW version:
Phone S/N: R21D89YC1JJ
Modem board: MSM8230AB
RF cal date: NONE
IMEI:
Initialization AT RIL… OK
Bypass MSL… OK
Repairing IMEI… OK
Rebooting phone… OK
Repair done

Done with Samsung Tool PRO v.24.2

Related:

  • i9190 reset msl security error
  • kode imei null samsung gt I9190
  • null i9190