Hello Infinity Team Here Are Some Issue N Suggestion For CM2 Kindly Fix/Add

Hello Team I Am Using CM2 From Long Time N Satisfied Too But I Found Few Issue Which Need To Fix So I Am Posting Here So You Can Check N Fix N Make Tool More Better ….I Also Having Some Suggestion For Your Tool Hope It Also Implemented As Well…. ;);)

So Lets Start With "Rockchip" Module

I Am Having 1 Tab Which Came On 4 Variant Wid Diff. OS N Touch But Processor Is Same…. I Found Tool Having Issue Wid Read Flash File On OS 4.1 & 4.2…. Os With 4.4 & 4.4.2 Read Well N Also Write Without Issue….

Logs Here

Read Info


Operation : ReadInfo [ v1.0 ]

======= Flash Info :
Channel : 0x00
FlashType : ADDE94EB74
FlashSize : 0x0000000200000000
FlashCaps : 4194304/16384/33/40/2

======= Device Info :
Android : v4.1.1
Project : 20130427.141522
Name : Cortex-A9
Brand : Cortex-A9
Device : Cortex-A9
Model : FT970

Read Info Ok!
Elapsed: 00:00:05

Read Firmware


Operation : Read Flash [ v1.0 ]

Collect InitData …
Reading now …

Reading : PARAMS
Reading : MISC
Reading : KERNEL
Reading : BOOT
Reading : RECOVERY
Reading : BACKUP

Read Firmware Hang Here N After Few Sec Show Error…


Half Readed File Link https://www.mediafire.com/?1b7emfhsikadgag

Now SPD I Found Some SPD 6531 Read Password Fail On Infinity As Well As Other Tool….With Infinity Show No Code Set…With Other Tool Show Wrong Password…


Operation : Read User Code [ v1.22 ]

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

==== Wait for phone…

Phone found! [ 79 ]
Port Opened
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sending boot …
Boot Sent , starting…
Boot Ver : Spreadtrum Boot Block version 1.2 Boot Ok
CPU ID : 6531 , FDLStat : 0100
[0] Flash DIE : 00C8 0060 0016 0000
[0] Flash VEN : GigaDevice , GD25LQ32
[0] Flash CAP : 00400000
Check data… Can take some time

User Code : Not Set


Elapsed: 00:00:07

Reconnect Power/Cable!

Here Is Log This I Also Report Before Long Time Ago N Give U Readed File Too Now Also Soon I Upload Dump (Readed In Lock State) N Share Link Here….After Format Code Removed….

Readed File Dump https://www.mediafire.com/?i1cfl123306w2wd

Also Kindly Revised Flashing For SPD Android When Write System Hangs Alot N Sometimes Fail Again N Again….

RDA Module Also Having Issue When Flash Handset It Fail In Middle Of Action While Factory Tool Done It….Sorry For This Report Log Not Available As I Found This Few Moths Back N Also Report But Not Fix Even After New Ver. Launch Issue Wid Mostly Intex N Spice Brands Kindly Check N Fix It ….

After Few Handset I Kill I Stop Using RDA Module N Use Factory Tools Now For Operations.

Old Thread http://forum.gsmhosting.com/vbb/f296…found-1993223/

Lastly About MTK MTK Working Good …But I AM Having Few Advises For MTK Kindly Add Specific/Desire Area Flash Option Like User Data Recovery

Add Support Area Button So We Can Directly Access Support Without Installing Shell… Or Make Support Shell Inbuilt In Software.

Add NVram Check Option To Check For Crash/Formated NV Area.

Add IMEI Auto checksum Last Digit Will Appear So We Can Check Type No. Ok Or We Make Mistake Somewhere.

Add Latest Dongle Manager On Infinity Directory With Setup Installer I Saw Many People Asking For Dongle Manager Link Or Use Old Dongle Manager Or If Possible Add Support Expire Date Show On Cm2.

Make 1 Option For Test Storage Before Flash/Erase Chip….I Saw This In Old Ver Not Check Wid New Now When U Flash With Tick Erase Before Flash Option N If Storage Emmc Damage With Erase Chip Then Stop & Handset Becomes Dead (Which Was In Logo Before) Mostly Give BROM ERROR : S_DL_PMT_ERR_NO_SPACE Something Like This….

Add Option To Select Com Port So We Can Use Infinity Box Or Other Box As Pinfinder By Selecting Their Com.

Hope Team Take This In Positive Way N Use All Above For Fix Issue ….Waiting For Positive Reply From Team

Above Files Are Protected With Pass I Give To Team Via PM

Thanks ;):D
Br. Hi-Tech Care