help n7000 replace emmc

i have n7000 dead… i try jtag but emmc not detect then try direct but same problem. then change new emmc but same problem. try jtag but still the same,
how to solved this problem?

this long emmc


Z3X EasyJtag Software ver.
Loading eMMC Addon Firmware… IO: 3300 mV
Box S/N: 04040F06A3B1776C, ,FW Ver.: 01.52
CMD Pullup Level:474 mV
CMD Active Level:2361 mV
eMMC Device Information
EMMC CID : 15010056594C30304D1935031A298EFC
EMMC CSD : D02701320F5903FFF6DBFFEF8A404066
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 08/2011 Rev.0x19
EMMC NAME: VYL00M , S/N: 889395753
EMMC NAME (HEX): 56594C30304D00
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 512 kB
EMMC ROM3 (Boot Partition 2) Capacity: 512 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x00
Backup saved: VYL00M_ 889395753_20160120_1102.extcsd
Searching for partition tables…
Detected GPT over MBR…
Medium UUID: 52444E41-494F-2044-4D4D-43204449534B
Warning: Entries Count = 128
MMCBLK0P0 (EFS) Range: [0X400000,0X17FFE00] ,Len: 1400000
MMCBLK0P1 (SBL1) Range: [0X1800000,0X193FE00] ,Len: 140000
MMCBLK0P2 (SBL2) Range: [0X1A00000,0X1B3FE00] ,Len: 140000
MMCBLK0P3 (PARAM) Range: [0X1C00000,0X23FFE00] ,Len: 800000
MMCBLK0P4 (KERNEL) Range: [0X2400000,0X2BFFE00] ,Len: 800000
MMCBLK0P5 (RECOVERY) Range: [0X2C00000,0X33FFE00] ,Len: 800000
MMCBLK0P6 (CACHE) Range: [0X3400000,0XFBFFE00] ,Len: C800000
MMCBLK0P7 (MODEM) Range: [0XFC00000,0X10BFFE00] ,Len: 1000000
MMCBLK0P8 (FACTORYFS) Range: [0X10C00000,0X45FFFE00] ,Len: 35400000
MMCBLK0P9 (DATAFS) Range: [0X46000000,0XC5FFFE00] ,Len: 80000000
MMCBLK0P10 (UMS) Range: [0XC6000000,0X38AFFFE00] ,Len: 2C5000000
MMCBLK0P11 (HIDDEN) Range: [0X38B000000,0X3AAFFFE00] ,Len: 20000000
Done…Presets has been updated…