Help nokia c7 hang on nokia


CANT CONNECT ON USB. FBUS ALSO FAILED

Reading Phone Info….
Connected phone – Nokia C7-00
Software ver : V 79_sr1_12w18.6 14-06-13 RM-675 (c) Nokia
IMEI : 355379041249292
XappVer : 0000085C
Ape Ver : 111.040.1514
APE Var : 111.040.1514111.040.1514.01.01111.040.1514.227.01
APE ADSP: 256
DSP Ver : 92_12w18
APE Test: rm675_ENO_v_0.0514_APEONLY
PPM :
CNT :
Product SN : 0AD2C40AA
Product code : 059F0J5
Base Prd.code: 0591401
Module code : 0204505
Long Prod.SN : 0
Hardware info=======
HWID : 6011
Retu : 40
Tahvo : 00
Battery: 4553 mV
APE BT: HCI Version 4 (rev. 0). LMP Version 4 (rev. 7455). Manufacturer 13.
APE HW: 256
RF ic : |Alli_4.3.4
Lock info ===========
IMEI : 355379041249292
IMEI spNet :
IMEI svNet :

Conf key : 0000000000000000
Provider key : 2440700000000000
Country : Finland
Operator : NOKIA (Open)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7

LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
Error collect lock info, try again
User code : Crypted
UserDataExLevel : Low [Gallery] , FullFlash method

Done!

Checking StartUp data …
———————–
SDD Key status : SDData is Ok
CMLA Key status : CMLA key Not exist
SimLock status : SimLock is Ok

Security status : Security Damaged!!!!! 🙁
– > Do Local SX4 or Server SX4 , Upload Tune ( checkbox or manual )

———————–

PA_SimLock Version :
PA_SL3 phone , SP_CODE_LEN : 15

Done!

when try to erase this error

User ACCEPTED FULL ERASE
Setting FlashMode
FlashMode set Ok
[1ST BOOT] : NO answer from phone… 🙁
– > 1. Check cable/connection, try again
– > 2. Maybe – HW fault or bad cable

Error booting phone…
Check Cable/HW , Try Again

Phone disconected!

Connect phone on selected interface…

Phone found!
Series 60 Device detected!
read info… – Ok

tried 2fbus cable same problem what do ido