Help plz imei of i9305

this is log

REPAIR INSTRUCTIONS:

Repair IMEI/Serial/BT/WiFi/Product Code:
1. Power on the phone.
2. Type *#0808# and select ‘DM+MODEM+ADB’.
3. Reboot phone.
4. Connect USB cable, install drivers if needed.
5. Select Samsung diagnostic port in port settings.
6. Press ‘Reset MSL’ button to deactivate security.
7. Wait till phone reboot.
8. Tap 7 times on ‘Build number’ in ‘Settings’-‘About phone’ to enable ‘Developer options’,
go to ‘Settings’-‘Developer options’ and enable ‘USB debugging’.
9. Fill values what you need to repair.
10. Press ‘Repair’ button.

Reset EFS, Disable Factory Mode:
Phone must be rooted!
If the software can’t root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on ‘Build number’ in ‘Settings’-‘About phone’ to enable ‘Developer options’,
go to ‘Settings’-‘Developer options’ and enable ‘USB debugging’.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Press ‘Reset EFS’ if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.
5. If you have yellow table on your device screen, then press ‘Disable Factory Mode’ button.

Wipe EFS/NVM:
If you have ‘IMEI null/null’ or ‘Phone baseband unknown’ errors,
Then you can try to repair this errors with this function.
Phone must be rooted!
If the software can’t root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on ‘Build number’ in ‘Settings’-‘About phone’ to enable ‘Developer options’,
go to ‘Settings’-‘Developer options’ and enable ‘USB debugging’.
3. To use ‘Auto backup/restore QCN’ function (recommended):
Type *#0808# and select ‘DM+MODEM+ADB’.
Type *#9090# and select ‘DM/DUN over HSIC’.
Or you can disable this function and use ADB only.
4. Connect the phone to PC with USB cable, install drivers if needed.
5. Choose diagnostic port in port settings if ‘Auto backup/restore QCN’ is not skipped.
6. Press ‘Wipe EFS/NVM’ button.

Operation: Repair
Selected model: GT-I9305
Selected port: COM52 Z3X BOX Serial Port,
Software version: 20.5

Waiting ADB device… OK
Reading phone info…
Model: GT-I9305
Android version: 4.4.4
Product code: Not Active
Phone version: I9305XXUFOA1
PDA version: I9305XXUFOB2
CSC version: I9305XEFFOB2
CSC country code: France
CSC sales code: XEF
HW version: Not Acti
Phone S/N: RF1C76A10DX
Modem board: MDM9215M
RF cal date: NONE
IMEI:
Initialization AT RIL… OK
Bypass MSL… OK
Repairing IMEI… OK
Rebooting phone… OK
Repair done

Done with Samsung Tool v.20.5

but iemi not fix ……??

Related:

  • efs samsung gt i 9305 imei
  • I9305 initialization at ril error