Help!!! Update eMMC Firmware error


I’m working on i9500 invalid RPMB data n make a try by repair/update eMMC firmware
The attached log before process

Code:

eMMC Boot Information
Revision 1.7 (for MMC v5.0, v5.01)
BOOT PARTITION    : BOOT PARTITION 1
PARTITION ACCESS  : R/W USER PARTITION
PERM_BOOT_CFG_PROT : DISABLED
PWR_BOOT_CFG_PROT  : DISABLED
BOOT MODE          : x4 SINGLE DATA RATE + LOW SPEED
RESET BUS WIDTH    : ENABLED
eMMC FirmW UPDATE  : DISABLED
EMMC CACHE SIZE    : 0 KB
SUPER PAGE SIZE    : 3584 KB
HC ERASE GROUP SIZE: 512 KB
USER AREA SIZE    : 15758000128 BYTES
BOOT PARTITION SIZE: 4096 KB
RPMB PARTITION SIZE: 512 KB

eMMC Device Information
Manufacturer ID: SAMSUNG
Device Type    : Embedded BGA
Application ID : 00
Product Name  : V3W00M
Product Rev    : 0.0
Product SN    : E51CFFBA
Manufactured  : January 1998

Card Specific Data
CSD_STRUCTURE    : Extended
SPEC_VERS        : Version 4.1/4.2/4.3
TAAC              : 13 ns
TRAN_SPEED        : 4000000 KHz
READ_BL_LEN      : 512 Bytes
C_SIZE            : HIGH CAPACITY
WP_GRP_ENABLE    : YES
WRITE_BL_LEN      : 512 Bytes
CONTENT_PROT_APP  : NO
PERM_WRITE_PROTECT: NO
TMP_WRITE_PROTECT : NO

Extended CSD Saved:
15010056335730304D00E51CFFBA21ED.ext_csd
Backup Directory:
C:\AdvanceBox Turbo Flasher\eMMC\EXT_CSD\


After process failed:

Code:

eMMC Boot Information
Revision 1.5 (for MMC v4.41)
BOOT PARTITION    : NOT BOOT ENABLED
PARTITION ACCESS  : R/W USER PARTITION
PERM_BOOT_CFG_PROT : DISABLED
PWR_BOOT_CFG_PROT  : DISABLED
BOOT MODE          : x1 SINGLE DATA RATE + LOW SPEED
RESET BUS WIDTH    : ENABLED
eMMC FirmW UPDATE  : DISABLED
EMMC CACHE SIZE    : 0 KB
SUPER PAGE SIZE    : 4096 KB
HC ERASE GROUP SIZE: 512 KB
USER AREA SIZE    : 8589934592 BYTES
BOOT PARTITION SIZE: 512 KB
RPMB PARTITION SIZE: 128 KB

eMMC Device Information
Manufacturer ID: SAMSUNG
Device Type    : Embedded BGA
Application ID : 00
Product Name  : 000000
Product Rev    : 5.6
Product SN    : 20120630
Manufactured  : January 2005

Card Specific Data
CSD_STRUCTURE    : Version 1.2
SPEC_VERS        : Version 4.1/4.2/4.3
TAAC              : 13 ns
TRAN_SPEED        : 4000000 KHz
READ_BL_LEN      : 512 Bytes
C_SIZE            : HIGH CAPACITY
WP_GRP_ENABLE    : YES
WRITE_BL_LEN      : 512 Bytes
CONTENT_PROT_APP  : NO
PERM_WRITE_PROTECT: NO
TMP_WRITE_PROTECT : NO

Extended CSD Saved:
150100303030303030562012063058CF.ext_csd
Backup Directory:
C:\AdvanceBox Turbo Flasher\eMMC\EXT_CSD\


I’ve tried use 3v3 both Vcc n QVcc

Related: