hi team atf need help with SM-G360M


Hello Dears ATF

I have a samsung SM-G360M dead after flash

pinout found Ok

file tar.md5 check done

file boot select Ok

write error 🙁

Product Name : P1J95K

here emmc name on phone

here log

Quote:

1. DO NOT USE THE PHONE"S BATTERY
2. Disconnect the USB Cable and Wait until the
the ATF Software will tell you to Connect the USB.

Interface Reset OK!
eMMC Access Type: SECTOR MODE
eMMC Supported Voltage Range:
3.5-3.6V, 3.4-3.5V, 3.3-3.4V, 3.2-3.3V, 3.1-3.2V
3.0-3.1V, 2.9-3.0V, 2.8-2.9V, 2.7-2.8V, 1.9-2.0V

CID : FE014E50314A39354B13122E08E352EB
CSD : D07F01320F5913FFFFFDFFEF924000A3 (CRC7 Fail 0x4B)

eMMC Boot Information
Revision 1.x (For MMC v4.x)
BOOT PARTITION : USER AREA
PARTITION ACCESS : GP PARTITION 4
PERM_BOOT_CFG_PROT : ENABLED
PWR_BOOT_CFG_PROT : ENABLED
BOOT MODE : (RESERVED) (RESERVED)
RESET BUS WIDTH : DISABLED
eMMC FirmW UPDATE : ENABLED
EMMC CACHE SIZE : 4294967168 KB
SUPER PAGE SIZE : 7680 KB
HC ERASE GROUP SIZE: 114176 KB
USER AREA SIZE : 2199023255040 BYTES
BOOT PARTITION SIZE: 32640 KB
RPMB PARTITION SIZE: 32640 KB

eMMC Device Information
Manufacturer ID: FE
Device Type : Embedded BGA
Application ID : 4E
Product Name : P1J95K
Product Rev : 1.3
Product SN : 122E08E3
Manufactured : January 1999

Card Specific Data
CSD_STRUCTURE : Extended
SPEC_VERS : Version 4.1/4.2/4.3
TAAC : 8000 ns
TRAN_SPEED : 4000000 KHz
READ_BL_LEN : 512 Bytes
C_SIZE : HIGH CAPACITY
WP_GRP_ENABLE : YES
WRITE_BL_LEN : 512 Bytes
CONTENT_PROT_APP : NO
PERM_WRITE_PROTECT: NO
TMP_WRITE_PROTECT : NO

Extended CSD Saved:
FE014E50314A39354B13122E08E352EB.ext_csd
Backup Directory:
C:\AdvanceBox Turbo Flasher\eMMC\EXT_CSD\