how repair write protected emmc

[1/4/2016 1:37:34 PM] [START OPERATION_ID = RESURRECT]
[1/4/2016 1:37:41 PM] Open serial port…OK
[1/4/2016 1:37:41 PM] Connecting to the RIFF Box…OK
[1/4/2016 1:37:41 PM] Firmware Version: 1.37, JTAG Manager Version: 1.56
[1/4/2016 1:37:41 PM] Selected Resurrector: [Nokia Lumia 520 V1.0.5149.18900]
[1/4/2016 1:37:41 PM]
[1/4/2016 1:37:41 PM] Connecting to the dead body…OK
[1/4/2016 1:37:41 PM] Detected dead body ID: 0x207D00E1 – CORRECT!
[1/4/2016 1:37:41 PM] Set I/O Voltage reads as 1.79V, TCK Frequency is 800 kHz
[1/4/2016 1:37:41 PM]
[1/4/2016 1:37:41 PM] Resurrection sequence started.
[1/4/2016 1:37:41 PM] Establish communication with the phone…OK
[1/4/2016 1:37:41 PM] Initializing internal hardware configuration…OK
[1/4/2016 1:37:41 PM] Uploading resurrector data into memory…OK
[1/4/2016 1:37:41 PM] Starting communication with resurrector…OK
[1/4/2016 1:37:41 PM]
[1/4/2016 1:37:41 PM] Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (M8G2YC, 0x0001D2000000 Bytes = 7.28 GB)
[1/4/2016 1:37:41 PM] Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (M8G2YC, 0x000000400000 Bytes = 4.00 MB)
[1/4/2016 1:37:41 PM]
[1/4/2016 1:37:41 PM] Selected Resurrection Data for the eMMC Chip with Capacity = 7.28GB
[1/4/2016 1:37:41 PM]
[1/4/2016 1:37:41 PM] Flashing the dead body…
[1/4/2016 1:37:41 PM] ERROR: DCC Loader has reported Error Code = 0x51 (0x000000). Trying to recover…OK
[1/4/2016 1:37:41 PM] ERROR: DCC Loader has reported Error Code = 0x51 (0x000000). Trying to recover…OK
[1/4/2016 1:37:41 PM] ERROR: DCC Loader has reported Error Code = 0x51 (0x000000). Trying to recover…OK
[1/4/2016 1:37:41 PM] ERROR: Stopped due to multiple communication errors. Terminating at 0x000000000000
[1/4/2016 1:37:41 PM] [FINISH OPERATION_ID = RESURRECT]