How To Hard UnBricked LG G3 (All Variants) (Fix Qhsusb bulk _ Qualcomm-9008)


After Read This Tutorial You Will Able To Fix These Situations.

NO BOOT , NO RECOVERY , NO DOWNLOAD MODE , NO POWER

1 : Shows "LGE AndroidNet USB port"
"LGE AndroidNet USB Modem"

2 : Only Shows "Qualcomm HS-USB QDLoader 9008"

Now Start Fixing

If You Are On Situation "1" You To Need To Change "LGE AndroidNet USB port" To "Qualcomm 9008"

1- open the phone

2- On MotherBoard Remove The Cover Of "eMMC"

3- short cut the pins in the photo you provided "without the battery" After Connect The "USB Data Cable"

After This Your Phone Shows "Unknown Device" In Device Manager So Install Qualcomn Driver Which Provided Below.

Reassemble Your Phone

And Connect With PC With Out Battary

Now Fixing "Qualcomm HS-USB QDLoader 9008"

Prerequisites:
AQcomm Drivers
BBoardDiag v2.99a
C) Choose correct TOT File For Your model Here
Directory Listing of //Xda/LG G3/Stock/
D) Make sure you have Visual C++
Redistributable Installed
https://drive.google.com/file/d/0BwW…FweER1MUU/view

1) Install Qualcomn Drivers
2) Extract Rar Of BoardDiag v2.99a And Run It
3) Extract Zip Of ToT file Which You Download For Your Phone Make Sure You Download Correct ToT File For Your Phone
4) Now See These Picture

1:Put ToT
2:Set Directory (where ToT File Will Extract)
3:Click On Extract Button

After Extract ToT You Will Get Files Like This

Then

1)Chosse "Chipset" For G3 Choose B2
2)Select Correct COM Port Which Shows in Device Manager i.e, (COM12)
3)Select Source Of file Where ToT file Extraced
4)Tick Into "AP Test" And "EMMC TEST"
5)Click On Start

After Both Test Passed

Choose Restore Option And
Restore These Files One by One In this sequence
Note: Don’t Change the Sequence
1)Boot
2)Aboot
3)BackupGpt
4)Boot
5)dbi
6)laf
7)PrimaryGpt
8)Recovery
9)rpm
10)tz
11)sbl1

Finished

After Complete Disconnect Phone And Insert Battary
If Your Phone Boot Up You Have Sucess
Then Boot Into Download Mode And Flash ToT File With LG Flash Tool.

IF Get Sucess Then Click Thanks Button

Take Care Of Yours And Your Phone 🙂

Special Thanks To This Man For Pictures.

@WillCracker Form XDA Developers.