HTC Desire 626s $0 On WindTAB – Instant Network Remote unlock pin “No 90 days wait”

HTC Desire 626s Overview:
With a premium all-metal unibody, the beautiful HTC Desire 626s doesn’t stray away from HTC’s gorgeous design tradition for its flagship line. For the first time in recent memory, we are also getting a high-res rear camera on an HTC finest – a 20 MP shooter – while the Ultra Pixel camera is moved at the front for perfect selfies. Add a scorching Snapdragon 810 chipset, 3 GB of DDR4 RAM, and 32 GB of storage out of the box, and the HTC Desire 626s quickly elevates HTC to competitive status with any other phone thrown at it, and we didn’t even mention the new BoomSound speakers with Dolby surround sound at the front.

HTC Desire 626s Sim Unlocking
Unlock WIND HTC Desire 626s to use any where in the world with any supported service provider like

Optus Australia Brasil, Straight talk, FamilyMobile, Vodafone, Personal, Claro, O2, Digicel, Telcel, Orange, Telenor, Optus, Tele2, MTN Rogers, Fido, Chatr, Bell, Virgin, Sasktel, MTS, PC telecom, Tbaytel, Telus, Koodo

Only at

Click here to buy Unlock code

HTC Desire 626s Unlocking instructions
1 Turn on phone with Not Accepted SIM card.
2 A menu will pop up to Insert the code.
3 Insert the provided code and press OK
4 Device is now unlocked.

How to Factory Reset Hard Reset HTC Desire 626s
How to Reset HTC Desire 626s pattern lock



Hard Reset will erase all of your data
All described operations you are doing at your own risk.

First Method

  1. In order to switch off your device press the Power key for a short while.
  2. Press and hold Volume Down + Power button at the same time for a couple of seconds.
  3. When you see the three Android images, then release held keys.

  4. Then press Volume Down to select option Factory reset, and press Power button to confirm.
  5. Good job! The hard reset has just been performed.

Second Method

  1. If the display is off, press the Power button to turn it back on.
  2. Then from Main Menu go to Settings and tap Backup & reset.
  3. Afterwards choose Reset phone and select Erase all data.
  4. Tap OK to confirm your choice.
  5. Success! Your device is ready to use.

How to Update HTC Desire 626s to latest Firmware

This software upgrade available for your HTC One provides the following key enhancements

  • Camera improvements
  • Thermal improvements
  • Various bug fixes and improvements

Before you proceed, please confirm that this software upgrade to 1.32.502.31 is a newer version than what is currently loaded on your device. If it is the same version, there is no need to reload the software. Navigate to the Home screen then tap All apps Settings About [B]Software Information[B/] and locate the Software version . If your Software number is less than 1.32.502.31 , you should proceed with the upgrade.

WARNING During the upgrade process the device will reboot multiple times and show software upgrade screens. Do not remove the AC charger as this might stop the update and your device may be rendered inoperable!

Getting Started
Before you proceed with the update, make sure you have done the following

  • Set aside approximately 20 minutes to allow the device to update
  • Connect the device to a charger
  • Ensure the battery is charged to at least 35%
  • Ensure the device is connected to AT&T 4GLTE and a stable Wi-Fi network

Installation Instructions
To download and install the update from the device, follow these steps below

1. From the Home screen tap All apps , tap Settings .
2. Tap AT&T Software Update .
3. Tap Check for updates .
4. Tap Continue to download the update.
5. If downloading the update using the mobile data network (not connected to Wi-Fi), you may be prompted with a data fee warning message. If this is acceptable, tap YES to start the upgrade process.
6. Status of the download can be checked in the Notifications pull down.
7. Once the download is complete, the user will be prompted to install from the Notifications pull down. Tap the System update to begin the upgrade process.
8. Tap OK to begin the update process to software version 1.32.502.31 .

WARNING During the upgrade process the device will reboot multiple times and show software upgrade screens. Do not remove the AC charger as this might stop the update and your device may be rendered inoperable!

9. Device will reboot and begin installation. Users will not be able to use their device during the installation process (approximately 10 Minutes).
10. The system update is complete. Tap OK to continue.

How to Root HTC Desire 626s


You will lose all your data and it is possible that you may brick your device

All described operations you are doing at your own risk.

Step 1 Before rooting the HTC Desire 626s, the bootloader of the handset must be unlocked. This can be achieved by heading over to HTC’s Dev website which has a detailed step-by-step guide on how to unlock the bootloader along with download links for all the files required during the process. Users, however, are first required to register on the site.

Once the boot loader has been unlocked, the device will reboot into Android OS.

Step 2 After setting up the device again, transfer the Step 3 Transfer the TWRP recovery image file to the same folder containing the ADBFastboot that was created while unlocking the bootloader of the handset in Step 1. Also, make sure to rename the file to something simpler like “twrp.img”.

Step 4 In the same command prompt window that was used in Step 1 to unlock the bootloader of the HTC Desire 626s, enter the following command
adb devices

Note: Mac owners, make sure to prefix a “.” before executing any fastboot or ADB command.

This command will confirm whether the HTC Desire 626s is being successfully detected by the computer or laptop it is connected to or not.

Proceed to reboot the handset into fastboot mode by entering the following command
adb reboot bootloader

Once the device boots into the bootloader mode, use the Volume keys to navigate to the fastboot option and confirm the selection by pressing the Power key.

Step 5 Now, enter the following commands one by one
fastboot flash recovery twrp.img
fastboot reboot

If all the steps mentioned above were followed properly, TWRP recovery must have been successfully installed on the HTC Desire 626s.

Step 6 Once the recovery has been installed, it is now time to gain root access on the HTC Desire 626s by flashing SueprSU. Switch off the handset once again and proceed to reboot it into bootloader mode by pressing the Volume Down + Power button simultaneously. Then, navigate to the [I]Recovery [I]option using the volume keys and confirm the selection by pressing the Power button.

After the HTC Desire 626s has boot into recovery, tap the ‘Install’ button and select the SuperSU ZIP file. Once the ZIP file has been installed, reboot the handset by selecting the ‘Reboot system’ now button.

The first boot after installing SuperSU might take some time as Android OS needs to rebuild cache for some of the apps. After the device has booted back into Android, open the SuperSU app to make sure that it does not need to update its binary. If not, then the HTC Desire 626s has been successfully rooted.

Since there is a custom recovery installed on the handset as well, installing a custom ROM down the line — if the user wishes to — will be easier as well.