i8200n hang in logo-flashed-now no network-help

flash logs as below

Selected firmware file: I8200XXUANC1_I8200OJVANB1
_ACR_Saudi_Arabia_Android_4.2.2.oct
Please put the phone into Download Mode and connect USB cable.
To put GT-I8200 into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" +"Power"+”Home" keys.
Writing firmware Canceled
Please put the phone into Download Mode and connect USB cable.
To put GT-I8200 into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" +"Power"+”Home" keys.
Found phone on
Firmware write started.
Writing TIMH section…
TIMH section has been written successfully.
Writing OBM section…
OBM section has been written successfully.
Writing DTim.Recovery section…
DTim.Recovery section has been written successfully.
Writing LOKE_2ND section…
LOKE_2ND section has been written successfully.
Writing DTim.Primary section…
DTim.Primary section has been written successfully.
Writing LOKE_1ST section…
LOKE_1ST section has been written successfully.
Writing PARAM section…
PARAM section has been written successfully.
Writing KERNEL section…
KERNEL section has been written successfully.
Writing RECOVERY section…
RECOVERY section has been written successfully.
Writing SYSTEM section…
SYSTEM section has been written successfully.
Writing MODEM section…
MODEM section has been written successfully.
Writing CACHE section…
CACHE section has been written successfully.
Writing HIDDEN section…
HIDDEN section has been written successfully.
Firmware writing successfully completed.

i saw one answer as wipe cache partition-full factory -again flash-did-still no network.

help me for certificate file-did not see in support