i9152 dead and no boot cofiguration

detect emmc

CLK Rate:14000 khz
HiPower mode is off!
———- eMMC Device Information ———-EMMC CID : 1501004D3847315741007C087A4E31D6
EMMC CSD : D02701320F5903FFF6DBFFE18E404028
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 03/2014 Rev.0x0
EMMC NAME: M8G1WA , S/N: 2080930382
EMMC NAME (HEX): 4D384731574100
EMMC ROM1 (Main User Data) Capacity: 7456 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x03
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
———————————————
Backup saved: M8G1WA_2080930382_20160924_1015.extcsd
Done.

write EXT_CSD

extCSD file…E:\EasyJtag\SAMSUNG Repair files\i9152 8gb alive phone (damage EFS)\M8G1WA_1133316256_20150806_1217.extcsd
Running:Repair extCSD…Z3X EasyJtag Software ver. 2.3.0.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:2124 mVCMD Active Level:2392 mV
Box IO Level:2800 mV
CLK Rate:14000 khz
Writing…
Done.

detect emmc again

———- eMMC Device Information ———-EMMC CID : 1501004D3847315741007C087A4E31D6
EMMC CSD : D02701320F5903FFF6DBFFE18E404028
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 03/2014 Rev.0x0
EMMC NAME: M8G1WA , S/N: 2080930382
EMMC NAME (HEX): 4D384731574100
EMMC ROM1 (Main User Data) Capacity: 7456 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x03
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
———————————————
Backup saved: M8G1WA_2080930382_20160924_1015.extcsd
Done.

still no boot configuration