J200f frp

AFTER many try to flash j200f software 16/10/2016 no way to downgrade to erlier version i done it with esayjtag emmc

———- eMMC Device Information ———-

EMMC CID : 90014A4838473474920103C3F04F5314

EMMC CSD : D02701320F5903FFFFFFFFE78A40002A

EMMC Manufacturer ID: 0090 , OEM ID: 014A
EMMC Date: 05/2016 Rev.0x1
EMMC NAME: H8G4t , S/N: 63172687
EMMC NAME (HEX): 48384734742000
EMMC ROM1 (Main User Data) Capacity: 7456 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.7 (MMC 5.0)

Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x00

High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]

Partitioning Support [PARTITIONING_SUPPORT]: 0x07

Device support partitioning feature

Device can have enhanced tech.

Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00

———————————————

Backup saved: H8G4t _ 63172687_20161118_1734.extcsd
Done.

Running:Format FRP Partition…
Z3X EasyJtag Software ver. 2.4.1.1

Loading eMMC Addon Firmware… IO: 2800 mV
Box S/N: 0F00E00C0xxxxxxx, ,FW Ver.: 01.55
CMD Pullup Level:484 mV
CMD Active Level:2145 mV
Box IO Level:2800 mV
CLK Rate:7000 khz
HiPower mode is off!
———- eMMC Device Information ———-

EMMC CID : 90014A4838473474920103C3F04F5314

EMMC CSD : D02701320F5903FFFFFFFFE78A40002A

EMMC Manufacturer ID: 0090 , OEM ID: 014A
EMMC Date: 05/2016 Rev.0x1
EMMC NAME: H8G4t , S/N: 63172687
EMMC NAME (HEX): 48384734742000
EMMC ROM1 (Main User Data) Capacity: 7456 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]

Partitioning Support [PARTITIONING_SUPPORT]: 0x07

Device support partitioning feature

Device can have enhanced tech.

Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00

———————————————

Searching for partition tables…
Detected GPT over MBR…
Warning: Header Size = 512 (expected 92)
Medium UUID: 52444E41-494F-2044-4D4D-43204449534B
GPT Entries Count = 128
Searching for FRP Data…

Marker of 9800000 is: 00199018
FRP/Persistent Storage Format Success!
Searching for KillSwitch Specific FRP Data…

LG Custom Data is not found!