lenovo vibe k5 note a7020a48 dead with cm2


lenovo k5 note came to me with unfortunetly error

i read firmware.bin with infinity after that i try to flash with "A7020a48_S259_160721_ROW" after erasing infinity give error now phone is dead.

here is log:-Chinese Miracle II [MTK module] v 1.58

Start at : [11/8/2016 / 11:34:15 AM]
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
DAgent configured successfully
Connection agent : PRELOADER
DRAM already initialized by Preloader
Link with DAgent established
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM41X
[eMMC] : FLASH_CID : 150100525831344D42074B35A8DC631F
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID : 0xABD5AB6B9683A43339D39A9AF21E449E
INT RAM : 0x00000000
EXT RAM : 0x80000000 [2 GiB]
[NAND] : FLASH : NOT INSTALLED
[UFSM] : FLASH : NOT INSTALLED
[HSUSB] : MODE : HIGH-SPEED
Boot Ok!

Reading Flash Content now …

Read Ok , collect info
Brand : Lenovo
ProdName : k52_a48
ProdModel : Lenovo A7020a48
Device : A7020a48
AndroidVer: 6.0
MTKxCPU : MT6755
MTKxPRJ : A7020a48_USR_S312_1609261808_mp7-V2.3_lenovo6755.66c.m_P148_ROW
Saved to : C:\Documents and Settings\javed\My Documents\MT6755__LENOVO__Lenovo_A7020a48__k52_a48 __A7020a48__A7020a48_USR_S312_1609261808_mp7-V2.3_lenovo6755.66c.m_P148_ROW__Android_6.0.ispff

Done!
Elapsed: 00:42:33
Reconnect Power/Cable!

Finish at : [11/8/2016 / 12:16:49 PM]

Scatter Load Ok , BaseBand : MT6755 , Project : k52_a48 , Storage : EMMC
Files found : 18 , Set to Flash : 17
Ready to Flash!

Start at : [11/8/2016 / 12:20:03 PM]
Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
DAgent configured successfully
Connection agent : PRELOADER
DRAM already initialized by Preloader
Link with DAgent established
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM41X
[eMMC] : FLASH_CID : 150100525831344D42074B35A8DC631F
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID : 0xABD5AB6B9683A43339D39A9AF21E449E
INT RAM : 0x00000000
EXT RAM : 0x80000000 [2 GiB]
[NAND] : FLASH : NOT INSTALLED
[UFSM] : FLASH : NOT INSTALLED
[HSUSB] : MODE : HIGH-SPEED
Boot Ok!

ScatCFG : BaseBand : MT6755 , Project : k52_a48 , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Enabled

M67BL : Check eMMC compatibility
M67BL : eMMC supported by BootLoader!

Selected forced PMT update
Build new PMT …
Update Primary …
Update Mirror …
PMT update Ok!

M67BL : Flash Erase
Total blocks to Erase : 5
Erase : 0x0000000000008000-0x0000000001BC0000
Erase : 0x0000000004BC8000-0x0000000004000000
Erase : 0x000000000A000000-0x0000000001000000
Erase : 0x000000000B300000-0x0000000002480000
Erase : 0x000000000DC80000-0x000000033E380000
Flash Erase Done, time used : 00:00:02

Processing : Writing all Flash Files
Flash Partition : PRELOADER
Flash PLC
Image Flash Ok
Flash Partition : RECOVERY
Image Flash Failed!
Something wrong with files or connection!

Operation Failed
Elapsed: 00:00:24
Reconnect Power/Cable!

CM2 TEAM URGENT HELP

Related:

  • how to flash lenovo update in a7020a48
  • dead boot in lenovo vibe k5