Lumia 530 Dead Boot Repai

After flashing with
LUMIA_530_DS_RM-1019_BIG_BOOT_01068.00023.14295.43003

set still in Qualcomm Dloader 9008 Mode

ATF showing error on flashing

Windows Phone 8/8.1/10 Flashing Started
Loading Flash Files Please Wait…

[DEAD BOOT REPAIR via USB is SUPPORTED]

================================================== ====
Windows Phone 8/8.1/10 Lumia Flasher
================================================== ====

If the Phone is ALIVE
1. Power On the Phone and Connect it to the USB Port

If the Phone is DEAD
1. Connect Phone to the USB Port
2. Press and Hold the VOLUME DOWN and POWER Buttons
3. Wait until the Phone Vibrates Shortly…
4. Stop Pressing the Buttons…

If the Phone is DEAD BOOT
1. Connect Phone to the USB Port
2. Install Correct Drivers:
"Nokia Emergency Connectivity" Located at:

C:\AdvanceBox Turbo Flasher\Driver\NOKIA_X2_USB_DRIVERS\
================================================== ====

Recovery Handle Found! – (Qualcomm)
PBL Emergency Download Detected

Start Sending Firehose Loader…
Firehose Loader Sent!
Executing Firehose Loader…
Start Processing Firehose Payload…
MSG_SIGNATURE Sent….
1 value= HW_INIT:init storage:fail
ERROR: error code= 1 value= HW_INIT:init storage:fail

ERROR: Flashing Failed!

Any solution for this……?