m7_wlv verizon s-off,unlock bootloader failed:(

Reading information…
Using Fastboot mode…
Reading common information
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband:
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.22.605.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA37MS911634
(bootloader) imei: 990004281031645
(bootloader) meid: 99000428103164
(bootloader) product: m7_wlv
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0731000
(bootloader) cidnum: VZW__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4320mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Execution time is 50(ms)
all: Done!
8064 detected, reading IMEI2 …
… (bootloader) [ERR] Command error !!!
Execution time is 0(ms)
Reading secure flag information
… (bootloader) secure_flag: 3
Execution time is 10(ms)
Reading CID information
… (bootloader) cid: VZW__001
Execution time is 10(ms)
Reading MEID information
… (bootloader) meid: 99000428103164
Execution time is 10(ms)
Read information completed.

bootloader unlock always this error

Starting bootloader unlock procedure
Phone detected, reading token…
Token detected successfully
Checking server connection…
Communicating with the XTC 2 Clip …
Connecting to the server…
Waiting for the server to process request, it may take up to 5 minutes…
Your request was processed successfully! Unlock token has been obtained
Sending flash unlocktoken unlocktoken_FA37MS911634.bin
Execution time is 147(ms)
sending ‘unlocktoken’ (0 KB)… OKAY
writing ‘unlocktoken’… FAILNot support on this device!
FAILED (remote: Not support on this device!)
Error: The unlock token was not accepted by the phone. Try to re-calculate it again.

s-off error

Sending oem writesecureflag 0
… (bootloader) This project does not support SD card
Execution time is 0(ms)
Operation finished

what can i do???