Micromax Q371 MT6582 Read FFW & Write Flash Done
>>Analysis of USB port,Please insert phone USB cable.
14.13.29 > Connecting...
14.13.29 > CPU TYPE:MT6582
14.13.29 > Hardware version:CA01
14.13.29 > Software version:0001
14.13.29 > SecCfgVal :0x00000000
14.13.29 > BromVersion :0xFF
14.13.29 > BLVersion :0x01
14.13.50 > Connect timed out.
>>Boot downloading complete!
14.13.54 > EMMC_ID:0x90014A4838473264040503A2DF721227
14.13.54 > EMMC_PRODUCT_NAME: SAMSUNG :0x483847326404
14.13.54 > EMMC_BOOT1_SIZE: 0x00400000
14.13.54 > EMMC_BOOT2_SIZE: 0x00400000
14.13.54 > EMMC_PRMB_SIZE: 0x00400000
14.13.54 > EMMC_GP1_SIZE: 0x00000000
14.13.54 > EMMC_GP2_SIZE: 0x00000000
14.13.54 > EMMC_GP3_SIZE: 0x00000000
14.13.54 > EMMC_GP4_SIZE: 0x00000000
14.13.54 > EMMC_USER_SIZE: 0x1D2000000(7.28 G)
>preloader.bin read success.
>MBR read success.
>EBR1 read success.
>lk.bin read success.
>boot.img read success.
>recovery.img read success.
>secro.img read success.
>logo.bin read success.
>system.img read success.
14.17.05 > File save path:H:\Box Setup\Volcano Box\Merapi\MerapiTool_v1.3.3_20151031\backup\MT6582-2016-02-09 16_44_03\
Flash files count is :12
Action : Firmware update.
Selected Acer: Liquid Z110
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM16)
Phone detected...Please wait
Sending DA agent, please wait...
EMMC: (58Gb+8192Mb) HYNIX 0x483847326404
EMMC FW VERSION: 05:00:00:00:00:00:00:00
BOOT STYLE : EMMC BOOT
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
Detected : DA USB VCOM Port (COM21)
Download firmware to flash now...
MBR checksum is executing ...
EBR1 checksum is executing ...
UBOOT checksum is executing ...
BOOTIMG checksum is executing ...
RECOVERY checksum is executing ...
SEC_RO checksum is executing ...
LOGO checksum is executing ...
ANDROID checksum is executing ...
CACHE checksum is executing ...
USRDATA checksum is executing ...
After flash this firmware need to perform some aditional steps
1.Reinsert battery, keep VOL- and power on untill phone will come in factory mode
2.Select line EMMC, and after press home button.
3.Wait untill phone will restart and will stuck on logo(leave for 1 min in this stage).
4.If phone not power on, reinsert battery and perform direct unlock.
If repair fail, please contact us or report in forum to provide help.
Wait untill phone will start charging.
- micromax q371 bin flash file