MT6572__samsung__GT-I9060__GT-I9060__4.1.2__ALPS.JB3.MP.V1 firmeware need

Hello,
i need this firmeware version :MT6572__samsung__GT-I9060__GT-I9060__4.1.2__ALPS.JB3.MP.V1
this is the backuped scatter file:
Scatter Load Ok , BaseBand : MT6572 , Project : mbk72_wet_lca , Storage : EMMC
Files found : 11 , Set to Flash : 10
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand : samsung
Device Model : GT-I9060
Device CPU : MT6572
Device IntName : GT-I9060
Device Version : 4.1.2
Device Compile : 14/03/2015 08:02:11
Device Project : ALPS.JB3.MP.V1
Device ExtInfo : GT-I9060
Ready to Flash!

i found a one on infinity support (0-CommunityUploads ) :
MT6572__samsung__GT-I9060__GT-I9060__4.1.2__ALPS.JB3.MP.V1

But when i used the scatter file downloaded from support appears this info :

Scatter Load Ok , BaseBand : MT6572 , Project : sanstar72_wet_lca , Storage : EMMC
Files found : 11 , Set to Flash : 10
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand : samsung
Device Model : GT-I9060
Device CPU : MT6572
Device IntName : GT-I9060
Device Version : 4.1.2
Device Compile : 7/15/2015 12:56:49 PM
Device Project : ALPS.JB3.MP.V1
Device ExtInfo : GT-I9060
Ready to Flash!

Operation : Flash [ v1.56 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 8 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8C00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004E3957524D420159478607903B
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMRW9
[eMMC] : FLASH_CID : 1501004E3957524D420159478607903B
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x0000000070000000
[eMMC] : FLASH_UCP : 1792 MiB [eMMC 2 GiB]
DEV RID : 0x2D335B74B333FFD9BCFBB750CF778D1B
INT RAM : 0x00020000
EXT RAM : 0x10000000 [256 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6572 , Project : sanstar72_wet_lca , Storage : EMMC
Setting : Flash Pre-Erase : Off ( Write Flash Only )
Setting : AFF verify : Enabled
Setting : HW verify : Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC NOT supported by BootLoader!
[BL_ERROR] : STORAGE : Break Flashing! This Firmware will kill phone!

Operation Failed
Elapsed: 00:00:12
Reconnect Power/Cable!

i think are not compatible ,
Pls help to find the compatible FW for this model

Thank you 🙂