my j700h cant flash to delete frp on

Platform: Samsung Android
Selected port: COM109
Selected model: SM-J700H
To put SM-J700H into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Searching for a phone. Please wait…
Phone found.
Initializing..
Resetting FRP lock..success
Resetting EE lock..success
Resetting Samsung Account lock..not supported
Operation was failed!
Performed by 2.2.9 software version
Please put the phone into Download Mode and connect USB cable.
To put SM-J700H into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Firmware write started.
Writing BOOTLOADER section…
BOOTLOADER section has been written successfully.
Writing CM section…
CM section has been written successfully.
Writing Firmware Failed
Performed by 2.2.9 software version
"sw rev. check fail.device:2.BINARY:1" what the problem