my n9005 is stell dead.


plz help i write pit+bl by emmc method ,but fone still dead,
here is logs.
==========================
================================================== ====
eMMC Test Point Connection Module
================================================== ====
================================================== ====

1. DO NOT USE THE PHONE"S BATTERY
2. Connect the Soldered TP Connections to ATF Box
3. Disconnect the USB Cable and Wait until the
the ATF Software will tell you to Connect the USB.

Interface Reset OK!
eMMC Access Type: SECTOR MODE
eMMC Supported Voltage Range:
3.5-3.6V, 3.4-3.5V, 3.3-3.4V, 3.2-3.3V, 3.1-3.2V
3.0-3.1V, 2.9-3.0V, 2.8-2.9V, 2.7-2.8V, 1.9-2.0V

CID : 1501004D4247344743009718608DB0D5
CSD : D02701320F5903FFF6DBFFEF8E40400D

eMMC Boot Information
Revision 1.7 (for MMC v5.0, v5.01)
BOOT PARTITION : NOT BOOT ENABLED
PARTITION ACCESS : R/W USER PARTITION
PERM_BOOT_CFG_PROT : DISABLED
PWR_BOOT_CFG_PROT : DISABLED
BOOT MODE : x1 SINGLE DATA RATE + LOW SPEED
RESET BUS WIDTH : ENABLED
eMMC FirmW UPDATE : DISABLED
EMMC CACHE SIZE : 0 KB
SUPER PAGE SIZE : 3584 KB
HC ERASE GROUP SIZE: 512 KB
USER AREA SIZE : 31268536320 BYTES
BOOT PARTITION SIZE: 4096 KB
RPMB PARTITION SIZE: 512 KB

eMMC Device Information
Manufacturer ID: SAMSUNG
Device Type : Embedded BGA
Application ID : 00
Product Name : MBG4GC
Product Rev : 0.0
Product SN : 9718608D
Manufactured : November 1997

Card Specific Data
CSD_STRUCTURE : Extended
SPEC_VERS : Version 4.1/4.2/4.3
TAAC : 13 ns
TRAN_SPEED : 4000000 KHz
READ_BL_LEN : 512 Bytes
C_SIZE : HIGH CAPACITY
WP_GRP_ENABLE : YES
WRITE_BL_LEN : 512 Bytes
CONTENT_PROT_APP : NO
PERM_WRITE_PROTECT: NO
TMP_WRITE_PROTECT : NO

Extended CSD Saved:
1501004D4247344743009718608DB0D5.ext_csd
Backup Directory:
C:\AdvanceBox Turbo Flasher\eMMC\EXT_CSD\

Start Writing Flash Images…

Flash Image: MBR + PGPT
Start Writing 0x00000032 Blocks at 0x00000000
Partition Selected: USER AREA

Total Elapsed Time 00:00:01
Write Success!

Flash Image: PIT
Start Writing 0x00000009 Blocks at 0x00000022
Partition Selected: USER AREA

Total Elapsed Time 00:00:00
Write Success!

Flash Image: SGPT
Start Writing 0x00000021 Blocks at 0x03A3DFDF
Partition Selected: USER AREA

Total Elapsed Time 00:00:00
Write Success!

Flash Image: aboot.mbn
Start Writing 0x00001000 Blocks at 0x00026800
Partition Selected: USER AREA

Total Elapsed Time 00:00:04
Write Success!

Flash Image: sbl1.mbn
Start Writing 0x00000400 Blocks at 0x00026380
Partition Selected: USER AREA

Total Elapsed Time 00:00:01
Write Success!

Flash Image: rpm.mbn
Start Writing 0x00000400 Blocks at 0x00027800
Partition Selected: USER AREA

Total Elapsed Time 00:00:01
Write Success!

Flash Image: tz.mbn
Start Writing 0x00000400 Blocks at 0x00027C00
Partition Selected: USER AREA

Total Elapsed Time 00:00:01
Write Success!

Flash Image: sdi.mbn
Start Writing 0x00000040 Blocks at 0x00026780
Partition Selected: USER AREA

Total Elapsed Time 00:00:01
Write Success!

Flash Image: non-hlos.bin
Start Writing 0x00007800 Blocks at 0x00002000
Partition Selected: USER AREA

Total Elapsed Time 00:00:26
Write Success!

Total Images Written: 6
Process Done!