need help samsung gt-n8000 samsung tab 10.1 dead after flash via atf direct emmc


unit status ,,always fialed in odin also atin z3x
and i tried to repair boot via atf emmc direct flashing but the tablet is dead
please help x shadow to solve this issue , i need more opinion and it wiill consider as beta test for this model revive via atf

Code:

======================================================
======================================================
      eMMC Test Point Connection Module           
======================================================
======================================================
                                                     
PLEASE FOLLOW STEPS 1-2-3 in CORRECT ORDER!!!       
If Connection Fails, repeat Step 1-2-3...           
                                                     
1. Attach Phone Battery to the Phone                 
2. Connect USB Cable to Phone                       
3. Connect the Soldered TP Connections to ATF Box   
                                                     

Interface Reset OK!
eMMC Access Type: SECTOR MODE
eMMC Supported Voltage Range:
3.5-3.6V, 3.4-3.5V, 3.3-3.4V, 3.2-3.3V, 3.1-3.2V
3.0-3.1V, 2.9-3.0V, 2.8-2.9V, 2.7-2.8V, 1.9-2.0V

CID : 1501004D414732474107A15874DB7FFF
CSD : D02701320F5903FFF6DBFFFF8A404007

eMMC Boot Information
Revision 1.5 (for MMC v4.41)
BOOT PARTITION    : BOOT PARTITION 1
PARTITION ACCESS  : R/W USER PARTITION
PERM_BOOT_CFG_PROT : DISABLED
PWR_BOOT_CFG_PROT  : DISABLED
BOOT MODE          : x4 SINGLE DATA RATE + LOW SPEED
RESET BUS WIDTH    : ENABLED
eMMC FirmW UPDATE  : DISABLED
EMMC CACHE SIZE    : 0 KB
SUPER PAGE SIZE    : 3584 KB
HC ERASE GROUP SIZE: 512 KB
USER AREA SIZE    : 15758000128 BYTES
BOOT PARTITION SIZE: 2048 KB
RPMB PARTITION SIZE: 128 KB

eMMC Device Information
Manufacturer ID: SAMSUNG
Device Type    : Embedded BGA
Application ID : 00
Product Name  : MAG2GA
Product Rev    : 0.7
Product SN    : A15874DB
Manufactured  : January 2012

Card Specific Data
CSD_STRUCTURE    : Extended
SPEC_VERS        : Version 4.1/4.2/4.3
TAAC              : 13 ns
TRAN_SPEED        : 4000000 KHz
READ_BL_LEN      : 512 Bytes
C_SIZE            : HIGH CAPACITY
WP_GRP_ENABLE    : YES
WRITE_BL_LEN      : 512 Bytes
CONTENT_PROT_APP  : NO
PERM_WRITE_PROTECT: NO
TMP_WRITE_PROTECT : NO

Extended CSD Saved:
1501004D414732474107A15874DB7FFF.ext_csd
Backup Directory:
C:\AdvanceBox Turbo Flasher\eMMC\EXT_CSD\

Start Writing Flash Images...

Flash Image: MBR + PGPT
Start Writing 0x00000032 Blocks at 0x00000000
Partition Selected: USER AREA

Total Elapsed Time 00:00:03
Write Success!

Flash Image: PIT
Start Writing 0x00000005 Blocks at 0x00000022
Partition Selected: USER AREA

Total Elapsed Time 00:00:27
Write Success!

Flash Image: SGPT
Start Writing 0x00000021 Blocks at 0x01D59FDF
Partition Selected: USER AREA

Total Elapsed Time 00:00:01
Write Success!

Flash Image: sboot.bin
Start Writing 0x000006C6 Blocks at 0x00000000
Partition Selected: BOOT 1

Total Elapsed Time 00:00:45
Write Success!

Flash Image: param.bin
Start Writing 0x00004000 Blocks at 0x00010000
Partition Selected: USER AREA

Total Elapsed Time 00:00:17
Write Success!

Flash Image: tz.img
Start Writing 0x00000138 Blocks at 0x000006C6
Partition Selected: BOOT 1

Total Elapsed Time 00:00:03
Write Success!

Total Images Written: 3
Process Done!


plaese im waiting for you reply

for x shadow MAO NI AKO FB bai https://www.facebook.com/jenny.dahan1