Nexus 5 Imei error alws


Welcome to Octoplus/Octopus Box LG Software version 2.1.7
——————————————————————————–
Checking data…OK
Platform: LG Qualcomm
Selected port: COM135
Selected model: D821
Reading info…Failed!
Port busyFailed!
Could not detect mode!
——————————————————————————–
Checking data…OK
Platform: LG Qualcomm
Selected port: COM26
Selected model: D821
Reading info…
Initializing ADB…OK
Waiting for phone…OK
Model ID: Nexus 5
Firmware version:
Kernel version: 3.4.0-gadb2201 (android-
build@vpbs1.mtv.corp.google.com) (gcc version 4.7 (GCC) ) #1 SMP
PREEMPT Wed Nov 20 14:42:53 PST 201
Android version: 4.4.2
Hardware: Qualcomm MSM 8974 HAMMERHEAD (Flattened Device Tree)
ARMv7 Processor rev 0 (v7l)
Switching to Fastboot mode…OK
Unlocking Bootloader…
Select "Yes" on phone screen and press "Power" button.
Please perform the following steps:
1. Wait while the phone will turn on
2. Reboot the phone
3. Enable "USB debugging" Mode
4. Connect the cable and check, whether ADB interface has appeared in PC
Device Manager
5. Press "Ok" button.
Initializing ADB…OK
Waiting for phone…OK
Switching to Fastboot mode…OK
Bootloader is unlocked.
Writing Bootloader…OK
Please, wait while the phone will turn on and press "Ok" button.
Trying to enable Diagnostics ports…
Initializing ADB…OK
Waiting for phone…OK
Checking root access…
Phone is already rooted.
Diagnostics ports are enbled!
Switching to Serial Port…
Found model AAAAANAZ*ÿh°Ç at port COM27
Reading info…
Mode: Normal
Firmware compiled date: Oct 01 2013
Firmware compiled time: 17:00:00
Firmware released date: Nov 19 2013
Firmware released time: 10:24:33
SPC: 000000
Fixing IMEI…
New IMEI: 359708-05-010577-9
Skip Read/Write QCN
Writing security area…
——————————————————————————–
Checking data…OK
Platform: LG Qualcomm
Selected port: COM27
Selected model: D821
Reading info…
Mode: Normal
Firmware compiled date: Oct 01 2013
Firmware compiled time: 17:00:00
Firmware released date: Nov 19 2013
Firmware released time: 10:24:33
SW Version: M8974A-1.0.25.0.23
SPC: 000000
Fixing IMEI…
New IMEI: 359708-05-010577-9
Skip Read/Write QCN
Writing security area…OK
Rebooting phone…
Please perform the following steps:
1. Wait while the phone will turn on
2. Reboot the phone
3. Enable "USB debugging" Mode
4. Connect the cable and check, whether ADB interface has appeared in PC
Device Manager
5. Press "Ok" button.
Initializing ADB…OK
Waiting for phone…
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Connect the cable and check, whether ADB interface has appeared in PC
Device Manager.OK
Switching to Fastboot mode…OK
Unlocking Bootloader…
Bootloader is unlocked.
Writing Bootloader…OK
Please, wait while the phone will turn on and press "Ok" button.
Trying to enable Diagnostics ports…
Initializing ADB…OK
Waiting for phone…OK
Checking root access…
Phone is already rooted.
Diagnostics ports are enbled!
Switching to Serial Port…
Found model AAAAANAZ*ÿh°Ç at port COM27
Error code: Z1AL3CAS2Q
——————————————————————————–
Platform: LG Qualcomm
Selected port: COM27
Selected model: D821
Reading info…
Mode: Normal
Firmware compiled date: Oct 01 2013
Firmware compiled time: 17:00:00
Firmware released date: Nov 19 2013
Firmware released time: 10:24:33
SW Version: M8974A-1.0.25.0.23
SPC: 000000
——————————————————————————–
Checking data…OK
Platform: LG Qualcomm
Selected port: COM135
Selected model: D821
Reading info…Failed!
Port busyFailed!
Could not detect mode!
——————————————————————————–
Checking data…OK
Platform: LG Qualcomm
Selected port: COM26
Selected model: D821
Reading info…Failed!
Could not detect mode!
——————————————————————————–
Checking data…OK
Platform: LG Qualcomm
Selected port: COM26
Selected model: D821
Reading info…Failed!
Could not detect mode!
——————————————————————————–
Checking data…OK
Platform: LG Qualcomm
Selected port: COM26
Selected model: D821
Reading info…
Initializing ADB…OK
Waiting for phone…OK
Model ID: Nexus 5
Firmware version:
Kernel version: 3.4.0-gadb2201 (android-
build@vpbs1.mtv.corp.google.com) (gcc version 4.7 (GCC) ) #1 SMP
PREEMPT Wed Nov 20 14:42:53 PST 201
Android version: 4.4.2
Hardware: Qualcomm MSM 8974 HAMMERHEAD (Flattened Device Tree)
ARMv7 Processor rev 0 (v7l)
Switching to Fastboot mode…OK
Unlocking Bootloader…
Bootloader is unlocked.
Writing Bootloader…OK
Please, wait while the phone will turn on and press "Ok" button.
Trying to enable Diagnostics ports…
Initializing ADB…OK
Waiting for phone…OK
Checking root access…
Phone is already rooted.
Diagnostics ports are enbled!
Switching to Serial Port…
Found model AAAAANAZ*ÿh°Ç at port COM27
Reading info…Failed!
Port busy
——————————————————————————–
Checking data…OK
Platform: LG Qualcomm
Selected port: COM27
Selected model: D821
Reading info…
Mode: Normal
Firmware compiled date: Oct 01 2013
Firmware compiled time: 17:00:00
Firmware released date: Nov 19 2013
Firmware released time: 10:24:33
SW Version: M8974A-1.0.25.0.23
SPC: 000000
Fixing IMEI…
New IMEI: 359708-05-010577-9
Skip Read/Write QCN
Writing security area…OK
Rebooting phone…
Please perform the following steps:
1. Wait while the phone will turn on
2. Reboot the phone
3. Enable "USB debugging" Mode
4. Connect the cable and check, whether ADB interface has appeared in PC
Device Manager
5. Press "Ok" button.
Initializing ADB…OK
Waiting for phone…OK
Switching to Fastboot mode…OK
Unlocking Bootloader…
Bootloader is unlocked.
Writing Bootloader…OK
Please, wait while the phone will turn on and press "Ok" button.
Trying to enable Diagnostics ports…
Initializing ADB…OK
Waiting for phone…OK
Checking root access…
Phone is already rooted.
Diagnostics ports are enbled!
Switching to Serial Port…
Found model AAAAANAZ*ÿh°Ç at port COM27
Error code: Z1AL3CAS2Q
——————————————————————————–
Checking data…OK
Platform: LG Qualcomm
Selected port: COM27
Selected model: D821
Reading info…
Mode: Normal
Firmware compiled date: Oct 01 2013
Firmware compiled time: 17:00:00
Firmware released date: Nov 19 2013
Firmware released time: 10:24:33
SW Version: M8974A-1.0.25.0.23
SPC: 000000
Fixing IMEI…
New IMEI: 359708-05-010577-9
Skip Read/Write QCN
Writing security area…OK
Rebooting phone…
Please perform the following steps:
1. Wait while the phone will turn on
2. Reboot the phone
3. Enable "USB debugging" Mode
4. Connect the cable and check, whether ADB interface has appeared in PC
Device Manager
5. Press "Ok" button.
Initializing ADB…OK
Waiting for phone…OK
Switching to Fastboot mode…OK
Unlocking Bootloader…
Bootloader is unlocked.
Writing Bootloader…OK
Please, wait while the phone will turn on and press "Ok" button.
Trying to enable Diagnostics ports…
Initializing ADB…OK
Waiting for phone…OK
Checking root access…
Phone is already rooted.
Diagnostics ports are enbled!
Switching to Serial Port…
Found model AAAAANAZ*ÿh°Ç at port COM27
Error code: Z1AL3CAS2Q

Dear team i alws error this while repairing imei of nexus 5
how to solve this problem