Nokia 216 ( MediaTek 6260 ) : Complete support :)

Download FW via BEST :
Code:

SSChannel : Create SC
SSChannel : SC Created!
ProductID HWCode : RM-1187
Selected Variant : RM-1187 NDT EURO EI BLUE CYRIL RU
Firmware Version : 10.01.11
Platform Version : S30+
SSChannel : DC Ok with code 0x06
Switch to IDM now ...

IDM initializing, wait...
Checking access to Products folder...
Folder for RM-1187 not exist. Attempt to create
Prepare done, collect info
[Query] : RM1187_059X7X2_10.01.11_010.vpl , 4,37 KiB
[Query] : RM-1187_CUSTPACK_ROM_EI_EURO_RU_eMP_10.01.11_001 , 106,29 KiB
[Query] : RM-1187_JUMP_TABLE_EI_EURO_RU_eMP_10.01.11_001 , 1,15 KiB
[Query] : RM-1187_LANG_PACK_ROM_EI_eMP_10.01.11_001 , 4,06 MiB
[Query] : RM-1187_ROM_eMP_10.01.11 , 1,40 MiB
[Query] : RM-1187_VIVA_eMP_10.01.11 , 5,63 MiB
Files to download : 6
Total size to download : 11,19 MiB
Downloading now, please, wait...
[Download] : RM1187_059X7X2_10.01.11_010.vpl
[Download] : RM-1187_CUSTPACK_ROM_EI_EURO_RU_eMP_10.01.11_001
[Download] : RM-1187_JUMP_TABLE_EI_EURO_RU_eMP_10.01.11_001
[Download] : RM-1187_LANG_PACK_ROM_EI_eMP_10.01.11_001
[Download] : RM-1187_ROM_eMP_10.01.11
[Download] : RM-1187_VIVA_eMP_10.01.11
Verify files now ...
[Verify Ok] : RM-1187_ROM_eMP_10.01.11
[Verify Ok] : RM-1187_LANG_PACK_ROM_EI_eMP_10.01.11_001
[Verify Ok] : RM-1187_CUSTPACK_ROM_EI_EURO_RU_eMP_10.01.11_001
[Verify Ok] : RM-1187_JUMP_TABLE_EI_EURO_RU_eMP_10.01.11_001
[Verify Ok] : RM-1187_VIVA_eMP_10.01.11
All done, all files were downloaded!


Flash :

Code:

Core : v2.24 , MTKx FlashEngine : v10.2

Verify files ...
MAUI : RM-1187_ROM_eMP_10.01.11
VIVA : RM-1187_VIVA_eMP_10.01.11
LANG : RM-1187_LANG_PACK_ROM_EI_eMP_10.01.11_001
CUST : RM-1187_CUSTPACK_ROM_EI_EURO_RU_eMP_10.01.11_001
JMPT : RM-1187_JUMP_TABLE_EI_EURO_RU_eMP_10.01.11_001
 - > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
 - > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 8 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : C1E783349510CBFE3621F3E63F7F5C9A
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : SUEZ.10.01.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Suez.fg
DA_VERIFY : 00
DA_JUMP  : 00040000
DA_AUTH  : Passed!
DA_INFO  : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW
[0] : FLASH_DIE : 00EF 0060 0018 0000
[0] : FLASH_LEN : 0x01000000
FAT_RANGE : 0x00CE0000-0x00FF3FFF , LEN : 0x00314000
SecureDecrypt : RM-1187_ROM_eMP_10.01.11
SecureDecrypt : RM-1187_VIVA_eMP_10.01.11
SecureDecrypt : RM-1187_LANG_PACK_ROM_EI_eMP_10.01.11_001
SecureDecrypt : RM-1187_CUSTPACK_ROM_EI_EURO_RU_eMP_10.01.11_001
SecureDecrypt : RM-1187_JUMP_TABLE_EI_EURO_RU_eMP_10.01.11_001
OVRLP : 000069B900000001
PHPID : SUEZ.10.01.11.p1
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-1187_ROM_eMP_10.01.11
Write : RM-1187_LANG_PACK_ROM_EI_eMP_10.01.11_001
Write : RM-1187_CUSTPACK_ROM_EI_EURO_RU_eMP_10.01.11_001
Write : RM-1187_JUMP_TABLE_EI_EURO_RU_eMP_10.01.11_001
Write : RM-1187_VIVA_eMP_10.01.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-1187_ROM_eMP_10.01.11
[VERIFY] DONE : RM-1187_LANG_PACK_ROM_EI_eMP_10.01.11_001
[VERIFY] DONE : RM-1187_CUSTPACK_ROM_EI_EURO_RU_eMP_10.01.11_001
[VERIFY] DONE : RM-1187_JUMP_TABLE_EI_EURO_RU_eMP_10.01.11_001
[VERIFY] DONE : RM-1187_VIVA_eMP_10.01.11
CODE_VERIFY : Ok
Executing FFS FORMAT now...
FAT_RANGE : 0x00CE0000-0x00FF3FFF , LEN : 0x00314000
DA_RET  : DA_IN_PROGRESS
DA_RET  : FORMAT_DONE
Rebooting phone now

Flashing done!
Total flash time : 00:03:23
Reboot phone Ok

 - > Hint : If phone shows Battery charge icon -  press and hold PowerOn button 10 seconds

Wait, when phone will be ready ...
Reading Phone Info....
Software Info:    10.01.11 00-00-00 RM-1187
IMEI:  353678080611789
Ape Version: NEMO G 59cb152c/0 (59cb152c+0) T Mon Jul  1 02:50:44 2013 U 69b804d5
PPM version :  EI
Product code:  059X7X2
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!

Connect phone on selected interface...


Identify :

Code:

Phone found!
MTKx Nokia Phone detected
Read info... Ok

Reading Phone Info....
Software ver : 10.01.11 00-00-00 RM-1187
IMEI 1  :      353678080611789
IMEI 2  :      353678080611797
XappVer :      000008C0
Ape Ver :      NEMO G 59cb152c/0 (59cb152c+0) T Mon Jul  1 02:50:44 2013 U 69b804d5
PPM    :      EI
CNT    :      SUEZ.10.01.11.p1
Product SN  :    F0E1C68AU
Product code :    059X7X2
Base Prd.code:    059X7J3
Module code  :    0207081
Hardware info=======
HWID  : 1100
LCDVer: TPO
Lock info ===========
IMEI      : 353678080611789
IMEI spNet : 3A 35 76 08 08 16 71 98

Conf key    : 800000000004000B
Provider key : 2440700000000000
Country      : Finland
Operator    : NOKIA (Open)

Lock info:
Block 1
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open; 
Block 2
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open; 
Block 3
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open; 
Block 4
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open; 
Block 5
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open; 
Block 6
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open; 
Block 7
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open; 

SimLock status : Ok
Security status : Ok

Done!


Make SelfTest :

Code:

Execuring SelfTests
Passed  :  Camera_If Test
Passed  :  Display Test
Passed  :  Keyboard_Short_Circuit Test
Passed  :  MicroSD_Short_Circuit Test
Passed  :  Sim_Short_Circuit Test
Passed  :  Real_Time_Clock Test
Passed  :  Bluetooth Test
Passed  :  Audio Test
Passed  :  Charge Test
Passed  :  Earpiece Test
Done


Read RPL :

Code:

Software Info:    10.01.11 00-00-00 RM-1187
IMEI:  353678080611789
PPM version :  EI
Product code:  059X7X2
Rebooting phone to FlashMode...
Wait for phone...
Phone found! [ 8 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : C1E783349510CBFE3621F3E63F7F5C9A
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : SUEZ.10.01.11.p1
BROM/BL stage done
Configure RAMINIT Ok
Reading flash now ...
Done!

Control Block Validation (Security Test) :
CBR is Ok, match with BB SN. Phone Security is Alive 🙂
Mobile Info
IMEI  : 353678080611789
BBUID : C1E783349510CBFE3621F3E63F7F5C9A
PCCode: 059X7X2
SimLock Info :
STATE : OPENED ( NOT LOCKED )

RPL Saved to : 353678080611789_MTKx.mtsec

Read Done!

Connect phone on selected interface...


Write RPL :

Code:

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
 - > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 8 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : C1E783349510CBFE3621F3E63F7F5C9A
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : SUEZ.10.01.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Suez.fg
DA_VERIFY : 00
DA_JUMP  : 00040000
DA_AUTH  : Passed!
DA_INFO  : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW
[0] : FLASH_DIE : 00EF 0060 0018 0000
[0] : FLASH_LEN : 0x01000000
FAT_RANGE : 0x00CE0000-0x00FF3FFF , LEN : 0x00314000
Boot Ok
Get settings...
[INFO] : Encrypted RPL
[RPL VERIFY] : Code 0x10 : MOBILE_ID match with MOBILE_ID info in RPL!
Reset SimLock Counters
Reset SimLock Counters Done!
DSPhone : LifeTimer not exist, skip
Security restored

All done!
Connect phone on selected interface...


Verify after security restore :

Code:

Reading Phone Info....
Software ver : 10.01.11 00-00-00 RM-1187
IMEI 1  :      353678080611789
IMEI 2  :      353678080611797
XappVer :      000008C0
Ape Ver :      NEMO G 59cb152c/0 (59cb152c+0) T Mon Jul  1 02:50:44 2013 U 69b804d5
PPM    :      EI
CNT    :      SUEZ.10.01.11.p1
Product SN  :    F0E1C68AU
Product code :    059X7X2
Base Prd.code:    059X7J3
Module code  :    0207081
Hardware info=======
HWID  : 1100
LCDVer: TPO
Lock info ===========
IMEI      : 353678080611789
IMEI spNet : 3A 35 76 08 08 16 71 98

Conf key    : 800000000004000B
Provider key : 2440700000000000
Country      : Finland
Operator    : NOKIA (Open)

Lock info:
Block 1
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open; 
Block 2
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open; 
Block 3
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open; 
Block 4
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open; 
Block 5
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open; 
Block 6
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open; 
Block 7
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open; 

SimLock status : Ok
Security status : Ok

Done!


Reset UserCode :

Code:

Software Info:    10.01.11 00-00-00 RM-1187
IMEI:  353678080611789
PPM version :  EI
Product code:  059X7X2
Rebooting phone to FlashMode...
Wait for phone...
Phone found! [ 8 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : C1E783349510CBFE3621F3E63F7F5C9A
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
BROM/BL stage done
MT626x : Reset User Code
All done! Remove USB cable
All Security Settings deactivated!
Code set to default : 12345
Done!
Connect phone on selected interface...


Format FS :

Code:

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
 - > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 8 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : C1E783349510CBFE3621F3E63F7F5C9A
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : SUEZ.10.01.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Suez.fg
DA_VERIFY : 00
DA_JUMP  : 00040000
DA_AUTH  : Passed!
DA_INFO  : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW
[0] : FLASH_DIE : 00EF 0060 0018 0000
[0] : FLASH_LEN : 0x01000000
FAT_RANGE : 0x00CE0000-0x00FF3FFF , LEN : 0x00314000

Executing FFS FORMAT now...
FAT_RANGE : 0x00CE0000-0x00FF3FFF , LEN : 0x00314000
DA_RET  : DA_IN_PROGRESS
DA_RET  : FORMAT_DONE

Elapsed: 00:00:27
Connect phone on selected interface...


Read FlashDump :

Code:

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
 - > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 8 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : C1E783349510CBFE3621F3E63F7F5C9A
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : SUEZ.10.01.11.p1
BROM/BL stage done
Configure RAMINIT Ok
Reading flash now ...
Done!

Control Block Validation (Security Test) :
CBR is Ok, match with BB SN. Phone Security is Alive 🙂
Mobile Info
IMEI  : 353678080611789
BBUID : C1E783349510CBFE3621F3E63F7F5C9A
PCCode: 059X7X2
SimLock Info :
STATE : OPENED ( NOT LOCKED )

Dump Saved to : 353678080611789_MTKx.bin
RPL Saved to : 353678080611789_MTKx_2nd.mtsec

Read Done!

Connect phone on selected interface...


Extract PhoneBook :

Code:

[MTK] : Extract PhoneBook from file : 353678080611789_MTKx.bin
[PROCESS] : Sorting Data [1/3]
[PROCESS] : Extract Data [2/3]
[PROCESS] : Decrypt Data [3/3]
[EXTRACT] : Ok, 7 records found!
[INFO] PhoneBook Memory : 2000 , Used : 7
CSV  Saved to : C:\InfinityBox\BEST\Phones_Data\Readout3678080611789_MTKx.csv
MBAK Saved to : C:\InfinityBox\BEST\Phones_Data\Readout3678080611789_MTKx.csv
[INFO] : MBAK Info :
Create folder "Backup" on SDcard. Put this file in SDcard to folder /Backup/
Inserd card in phone, make "Restore backup" from Settings->Backup
Done