nokia 220ds flashing failed

got phone with hang on logo…
try to flash but get error

Core : v2.15 , MTKx FlashEngine : v9.3

Verify files …
MAUI : RM-969_ROM_eMP_30.06.11
VIVA : RM-969_VIVA_eMP_30.06.11
LANG : RM-969_LANG_PACK_ROM_ME_eMP_30.06.11_001
CUST : RM-969_CUSTPACK_ROM_ME_APAC_ID_eMP_30.06.11_001
JMPT : RM-969_JUMP_TABLE_ME_APAC_ID_eMP_30.06.11_001
– > MODE : FullFlash
Repair Mode is On

Dead Mode is Selected
Waiting for USB device…
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
– > If phone can’t switch to BL – use battery or flash from Local mode!

— Insert USB cable now! —
Wait for phone…
Phone found! [ 97 ]
Sync…
Sync Ok, read regs…
Inital regs read done
Boot Info :
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0001
BB_CPU_SN : 0DF0E64AF9DA6420C8CB0BACC839FD03
BROM Protocol Version : 05
BROM Status : 1012
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting…
Setting done , result code 0x8000
[BL_ERROR] : Error while receiving Project ID info!
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target …
DA_eMP_Rivendell.fg
DA_VERIFY : 00
DA_JUMP : 00040000
DA_AUTH : Passed!
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x88
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW
[0] : FLASH_DIE : 00EF 0060 0018 0000
[0] : FLASH_LEN : 0x01000000
[ERROR] : DA_FAT_NOT_EXIST
FAT_RANGE : 0x00000000-0xFFFFFFFF , LEN : 0x00000000
SecureDecrypt : RM-969_ROM_eMP_30.06.11
SecureDecrypt : RM-969_VIVA_eMP_30.06.11
SecureDecrypt : RM-969_LANG_PACK_ROM_ME_eMP_30.06.11_001
SecureDecrypt : RM-969_CUSTPACK_ROM_ME_APAC_ID_eMP_30.06.11_001
SecureDecrypt : RM-969_JUMP_TABLE_ME_APAC_ID_eMP_30.06.11_001
[ERROR] :
[ERROR] : FT_FILE_NOT_EXIST
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
[ERROR] : DA_NOR_BLOCK_DATA_UNSTABLE
Write : RM-969_ROM_eMP_30.06.11
[ERROR] :
Error While flash area!!!
Flashing failed!

Connect phone on selected interface…