Product Team Help N7000 Revieing

Am trying to revive N7000 with the repair file I get this error below ,what do I need to do before I remove the jtag wires and try the fone if it can boot.

Starting Z3X Jtag Pin Finder…
Successfully connected to box on COM117
Waiting for box reset…
Box S/N: 00000000xxxxxxxxxxxx
Box Working Mode: JTAG Pin Finder.
Starting Z3X Jtag Pin Finder…
Stage 1: Search TCK / TMS / TDI / TDO…
Get IDCODE…
JTAG Pinout Found: TCK: Pin 9 / TMS: Pin 15 / TDI: Pin 5 / TDO: Pin 13
CPU IDCODE : 0x4BA00477 Mfg.: 0x23b, Part: 0xba00, Ver.: 0x4
CPU Manufacturer: QUALCOMM , CPU Name: CORTEX A9
Stage 2: Searching TRST…
TRST Pin Found: TRST: Pin 7
Box S/N: 0D0D0316FCxxxxxxxxx, ,FW Ver.: 01.52
Box Working Mode: JTAG Box.
Loading repair file: ‘C:\Users\LES\Desktop\N7000 Repair filesz\Samsung GT-N7000_V1.01.rcp’
Repair File ver. : Easy Repair for Mfg: SAMSUNG Model: GT-N7000, Ver.: 1.01
Error loading information!
Easy-Repair file load OK!
Using EasyRepair Mode…
Warning , you are using custom pinout config make shure that NRST and GND on proper places!
Checking repair data…
EasyJtag Suite ver.: 2.0.7.3 / wxWidgets 3.1.0-W-U started.
Operating system ver.: Windows 7 (build 7601, Service Pack 1).

For support and updates visit EasyJtag ? most powerfull eMMC and JTAG tool on market. | EMMC BOX, JTAG BOX ,Z3X , BOOT REPAIR , FORENSICS TOOL
Check security…OK
Initialising: SAMSUNG GT-N7000 Config ver.:1.01
I/O Level set to : 2800 mV
Box S/N: 0D0D0316Fxxxxxxx ,FW Ver.: 01.52
Connecting to Target…
JTAG device: S5PC210
CPU IDCODE : 0x4BA00477 Mfg.: 0x23b, Part: 0xba00, Ver.: 0x4
CPU Manufacturer: QUALCOMM , CPU Name: CORTEX A9
Halting CPU…
Init target …
Target Init Error

WHATS THIS ERROR (Target Init Error)