Qmobile V600 Tab Dead Recover With Lost Time


Qmobile V600 Tab Dead Recover With Lowest Time.Only 1 Avanger Box.Also Chack Flash Time with Boult Speed.

Info Log.
[CODE] Curent Platform: MT6582
Phone must be off with battery inside.
Please insert USB cable now…
Detected(5) : MediaTek PreLoader USB VCOM Port (COM5)
Starting META mode, wait…
Restarting, wait….
Restarting to meta,wait….
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
META Port Detected[30] Gadget Serial (COM30)
USB\VID_0BB4&PID_0005&MI_02&1F2F085E&0&0002
SP_META_BOOT
Starting META using port[COM30], wait…
BaseBand CPU : MT6582, E01
MODEM SW Version : MOLY.WR8.W1315.MD.WG.MP.V34.P2
MODEM HW Version : MALATA82_TB_KK_HSPA_HW
IMEI[1] : 357923060075530
IMEI[2] : FFFFFFFFFFFFFFF
BRAND: QTab
MODEL: QTab V6
NAME: QTab V6
VERSION: 4.4.2
All done.
[CODE]

Write Firmware.

Code:

Flash files count is :14
 Action : Firmware update.
 Selected 0-By CPU: MT6582
 Exe version: Avengers Box MTK 0.2.4
 Scenario: Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM5)
 Phone detected...Please wait
 Sending DA agent, please wait...
 BaseBand CPU :MT6582_S01
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
----------------------------------------------------
 EMMC: (58Gb+8192Mb) KSI 0x533130303038
 EMMC FW VERSION: 06:00:00:00:00:00:00:00
 EMMC CID: 70010053313030 : 000000000000000000
 EMMC UA SIZE: 0x1d2000000   
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2c00000      [7.293 GB]
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detecting high speed port, wait......
 Detected : MediaTek DA USB VCOM Port (COM9)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done





BRO
AZHERGOGA007