RM 1013 Flashing Error

Connect phone on selected interface…

Core : v2.20 , NXP FlashEngine : v5.2

Flash Mode : Full Update (System, User, Boot)
Check and select files according selected FlashMode

Ok, Set : rm1013_2.1.0.13_059V782_001_rawprogram_unsparse_ui .xml
Ok, Set : rm1013_2.1.0.13_user_prog_emmc_firehose_8x10.mbn

Dead Mode is Selected
1. Phone should be Off!
2. Press and hold ‘Volume Down’ button
3. Insert USB cable and hold button, until phone will be detected

[FireHose_Error] : Phone not detected in any supported mode. Check Drivers, Cable, Battery

Flash Error
Break flashing!

Connect phone on selected interface…

Phone found!
Nokia X Platform Phone detected
Read info… Ok

Phone disconected!

Connect phone on selected interface…

Phone found!
Nokia X Platform Phone detected
Read info… Ok

Phone disconected!

Connect phone on selected interface…

Phone found!
Nokia X Platform Phone detected
Read info… Ok

Phone disconected!

Connect phone on selected interface…

Phone found!
Nokia X Platform Phone detected
Read info… Ok

Phone disconected!

Connect phone on selected interface…

Phone found!
Nokia X Platform Phone detected
Read info… Ok

Phone disconected!

Connect phone on selected interface…

Phone found!
Nokia X Platform Phone detected
Read info… Ok

Phone disconected!

Connect phone on selected interface…

Flash Files NOT selected!
1. Select required RMxx product
2. Select required Product Code / Region from list
You can download need files in NaviManager tab

Core : v2.20 , NXP FlashEngine : v5.2

Flash Mode : Full Update (System, User, Boot)
Check and select files according selected FlashMode

Ok, Set : rm1013_2.1.0.13_059V782_001_rawprogram_unsparse_ui .xml
Ok, Set : rm1013_2.1.0.13_user_prog_emmc_firehose_8x10.mbn

Dead Mode is Selected
1. Phone should be Off!
2. Press and hold ‘Volume Down’ button
3. Insert USB cable and hold button, until phone will be detected

Get Phone Initial Info
Product : MSM8610
Version : 0.5
Serial : 3C55058

[FireHose_Error] : Error while init RAW mode (NO RAW ACK)! Try flash again in DEAD mode

Flash Error
Break flashing!

Connect phone on selected interface…

Core : v2.20 , NXP FlashEngine : v5.2

Flash Mode : Full Update (System, User, Boot)
Check and select files according selected FlashMode

Ok, Set : rm1013_2.1.0.13_059V782_001_rawprogram_unsparse_ui .xml
Ok, Set : rm1013_2.1.0.13_user_prog_emmc_firehose_8x10.mbn

Dead Mode is Selected
1. Phone should be Off!
2. Press and hold ‘Volume Down’ button
3. Insert USB cable and hold button, until phone will be detected

[FireHose_Error] : Phone not detected in any supported mode. Check Drivers, Cable, Battery

Flash Error
Break flashing!

Connect phone on selected interface…

Core : v2.20 , NXP FlashEngine : v5.2

Flash Mode : Full Update (System, User, Boot)
Check and select files according selected FlashMode

Ok, Set : rm1013_2.1.0.13_059V782_001_rawprogram_unsparse_ui .xml
Ok, Set : rm1013_2.1.0.13_user_prog_emmc_firehose_8x10.mbn

Dead Mode is Selected
1. Phone should be Off!
2. Press and hold ‘Volume Down’ button
3. Insert USB cable and hold button, until phone will be detected

[FireHose_Error] : Phone not detected in any supported mode. Check Drivers, Cable, Battery

Flash Error
Break flashing!

Connect phone on selected interface…