Samsung GT-i8150 Galaxy W Flashing Done With Octopus


Samsung GT-i8150 Galaxy W Flashing Done With Octopus

Log Here::

Code:

Welcome to Octoplus/Octopus Box Samsung software version 2.1.9
-----------------------------------------------------------------------------------
To connect SM-G531H phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
Selected firmware file: I8150ZSKI3_OZSKI3.oct
Please put the phone into Download Mode and connect USB cable.
To put GT-I8150 into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" +"Power"+''Home"  keys.
Searching for a phone. Please wait...
Found phone on
Firmware write started.
Writing partition.bin section...
partition.bin section has been written successfully.
Writing dbl.mbn section...
dbl.mbn section has been written successfully.
Writing osbl.mbn section...
osbl.mbn section has been written successfully.
Writing amss.mbn section...
amss.mbn section has been written successfully.
Writing EMMCBOOT.MBN section...
EMMCBOOT.MBN section has been written successfully.
Writing adsp.mbn section...
adsp.mbn section has been written successfully.
Writing boot.img section...
boot.img section has been written successfully.
Writing system.ext4 section...
system.ext4 section has been written successfully.
Writing cache.ext4 section...
cache.ext4 section has been written successfully.
Writing recovery.img section...
recovery.img section has been written successfully.
Writing persist.ext4 section...
persist.ext4 section has been written successfully.
Writing preload.ext4 section...
preload.ext4 section has been written successfully.
Please, restart the phone to apply changes
Firmware writing successfully completed.