Samsung I9000M Unlock SucessFully

Code:

Scanning devices ... 1 found
dev[1]
Manufactory:
SAMSUNG
 
Model: GT-I9000M
 
Hardware: HERRING
 
Mode: normal
 
Prepare environment ... need root access
 
Start Get Root ... will try 6 methods
 
Root with psneuter ... failed
 
Root with root1 ... failed
 
Root with exynos-abuse ... failed
 
Root with root2 ... ok
 
Please get temporary root first.
Bypass MSL ...
Update device ...
Reboot device to
NORMAL mode ...
Wait device ready ...
 
This operation need MTP interface, if you are connect device via UART cable, replace with USB cable and re-scan device.If not support read codes, use Unlock instead
Time used : 1 min 51 s
 
Scanning devices ... 2 found
dev[1]
Manufactory:
SAMSUNG
 
Model: GT-I9000M
 
Hardware: HERRING
 
Mode: normal
 
dev[2]
Manufactory:
Model:
Hardware:
Mode:
 
This operation need MTP interface, if you are connect device via UART cable, replace with USB cable and re-scan device.If not support read codes, use Unlock instead
Time used : 0.0 s
 
This operation need MTP interface, if you are connect device via UART cable, replace with USB cable and re-scan device.
 
Time used : 0.0 s
 
Scanning devices ... 2 found
dev[1]
Manufactory:
SAMSUNG
 
Model: GT-I9000M
 
Hardware: HERRING
 
Mode: normal
 
dev[2]
Manufactory:
Model:
Hardware:
Mode:
Scanning devices ... 0 found
Scanning devices ... 0 found
Scanning devices ... 0 found
Scanning devices ... 1 found
dev[1]
Manufactory:
SAMSUNG
 
Model: GT-I9000M
 
Hardware: HERRING
 
Mode: normal
 
Prepare environment ...
Bypass MSL ...
Update device ...
Reboot device to
NORMAL mode ...
Wait device ready ...
Device Authentication ...
communication failed
Please check:
1. choose the right port
2. some device UART need re-connect use each 30 seconds
 
If not support read codes, use Unlock instead
Time used : 1 min 36 s
 
Scanning devices ... 1 found
dev[1]
Manufactory:
SAMSUNG
 
Model: GT-I9000M
 
Hardware: HERRING
 
Mode: normal
 
Prepare environment ...
Bypass MSL ...
Update device ...
Reboot device to
NORMAL mode ...
Wait device ready ...
Device Authentication ...
communication failed
Please check:
1. choose the right port
2. some device UART need re-connect use each 30 seconds
 
If not support read codes, use Unlock instead
Time used : 1 min 46 s
 
Can't open port COM9
Please check:
1. choose the right port
2. some device UART need re-connect use each 30 seconds
 
Time used : 0.0 s
 
Scanning devices ... 0 found
Device Authentication ...
Unlocking device ... ok
All lock written to '00000000'
Reboot device to
NORMAL mode ...
 
Re-scan device before any operation please
 
Time used : 11.1 s