Samsung I9060/ds Kiess mode ALl EMMC Process Done

Samsung I9060/ds Kiess mode ALl EMMC Process Done
Phone now ded :confused:
cant.t show dl mode manually nd also use MBC cable

plz help me

1. DO NOT USE THE PHONE"S BATTERY
13:17:31 : 2. Connect the Soldered TP Connections to ATF Box
13:17:31 : 3. Disconnect the USB Cable and Wait until the
13:17:31 : the ATF Software will tell you to Connect the USB.
13:17:31 :
13:17:31 :
13:17:31 : Interface Reset OK!
13:17:31 : eMMC Access Type: SECTOR MODE
13:17:31 : eMMC Supported Voltage Range:
13:17:31 : 3.5-3.6V, 3.4-3.5V, 3.3-3.4V, 3.2-3.3V, 3.1-3.2V
3.0-3.1V, 2.9-3.0V, 2.8-2.9V, 2.7-2.8V, 1.9-2.0V
13:17:31 :
13:17:31 : CID : 1501004B3758564D4203831AD00EC0B3
13:17:31 : CSD : D02701320F5903FFF6DBFFEF8E40400D
13:17:31 :
13:17:31 : eMMC Boot Information
13:17:31 : Revision 1.6 (for MMC v4.5, v4.51)
13:17:31 : BOOT PARTITION : NOT BOOT ENABLED
13:17:31 : PARTITION ACCESS : R/W USER PARTITION
13:17:31 : PERM_BOOT_CFG_PROT : DISABLED
13:17:31 : PWR_BOOT_CFG_PROT : DISABLED
13:17:31 : BOOT MODE : x4 SINGLE DATA RATE + LOW SPEED
13:17:31 : RESET BUS WIDTH : ENABLED
13:17:31 : eMMC FirmW UPDATE : DISABLED
13:17:31 : EMMC CACHE SIZE : 0 KB
13:17:31 : SUPER PAGE SIZE : 3072 KB
13:17:31 : HC ERASE GROUP SIZE: 512 KB
13:17:31 : USER AREA SIZE : 7818182656 BYTES
13:17:31 : BOOT PARTITION SIZE: 4096 KB
13:17:31 : RPMB PARTITION SIZE: 512 KB
13:17:31 :
13:17:31 :
13:17:31 : eMMC Device Information
13:17:31 : Manufacturer ID: SAMSUNG
13:17:31 : Device Type : Embedded BGA
13:17:31 : Application ID : 00
13:17:31 : Product Name : K7XVMB
13:17:31 : Product Rev : 0.3
13:17:31 : Product SN : 831AD00E
13:17:31 : Manufactured : December 1997
13:17:31 :
13:17:31 : Card Specific Data
13:17:31 : CSD_STRUCTURE : Extended
13:17:31 : SPEC_VERS : Version 4.1/4.2/4.3
13:17:31 : TAAC : 13 ns
13:17:31 : TRAN_SPEED : 4000000 KHz
13:17:31 : READ_BL_LEN : 512 Bytes
13:17:31 : C_SIZE : HIGH CAPACITY
13:17:31 : WP_GRP_ENABLE : YES
13:17:31 : WRITE_BL_LEN : 512 Bytes
13:17:31 : CONTENT_PROT_APP : NO
13:17:31 : PERM_WRITE_PROTECT: NO
13:17:31 : TMP_WRITE_PROTECT : NO
13:17:31 :
13:17:31 : Extended CSD Saved:
13:17:31 : 1501004B3758564D4203831AD00EC0B3.ext_csd
13:17:31 : Backup Directory:
13:17:31 : C:\AdvanceBox Turbo Flasher\eMMC\EXT_CSD\
13:17:31 :
13:17:57 : ================================================== ====
13:17:57 : ================================================== ====
13:17:57 : eMMC Test Point Connection Module
13:17:57 : ================================================== ====
13:17:57 : ================================================== ====
13:17:57 :
13:17:57 : 1. DO NOT USE THE PHONE"S BATTERY
13:17:57 : 2. Connect the Soldered TP Connections to ATF Box
13:17:57 : 3. Disconnect the USB Cable and Wait until the
13:17:57 : the ATF Software will tell you to Connect the USB.
13:17:57 :
13:17:57 :
13:17:57 : Interface Reset OK!
13:17:57 : eMMC Access Type: SECTOR MODE
13:17:57 : eMMC Supported Voltage Range:
13:17:57 : 3.5-3.6V, 3.4-3.5V, 3.3-3.4V, 3.2-3.3V, 3.1-3.2V
3.0-3.1V, 2.9-3.0V, 2.8-2.9V, 2.7-2.8V, 1.9-2.0V
13:17:57 :
13:17:57 : CID : 1501004B3758564D4203831AD00EC0B3
13:17:57 : CSD : D02701320F5903FFF6DBFFEF8E40400D
13:17:57 :
13:17:57 : eMMC Boot Information
13:17:57 : Revision 1.6 (for MMC v4.5, v4.51)
13:17:57 : BOOT PARTITION : NOT BOOT ENABLED
13:17:57 : PARTITION ACCESS : R/W USER PARTITION
13:17:57 : PERM_BOOT_CFG_PROT : DISABLED
13:17:57 : PWR_BOOT_CFG_PROT : DISABLED
13:17:57 : BOOT MODE : x4 SINGLE DATA RATE + LOW SPEED
13:17:57 : RESET BUS WIDTH : ENABLED
13:17:57 : eMMC FirmW UPDATE : DISABLED
13:17:57 : EMMC CACHE SIZE : 0 KB
13:17:57 : SUPER PAGE SIZE : 3072 KB
13:17:57 : HC ERASE GROUP SIZE: 512 KB
13:17:57 : USER AREA SIZE : 7818182656 BYTES
13:17:57 : BOOT PARTITION SIZE: 4096 KB
13:17:57 : RPMB PARTITION SIZE: 512 KB
13:17:57 :
13:17:57 :
13:17:57 : eMMC Device Information
13:17:57 : Manufacturer ID: SAMSUNG
13:17:57 : Device Type : Embedded BGA
13:17:57 : Application ID : 00
13:17:57 : Product Name : K7XVMB
13:17:57 : Product Rev : 0.3
13:17:57 : Product SN : 831AD00E
13:17:57 : Manufactured : December 1997
13:17:57 :
13:17:57 : Card Specific Data
13:17:57 : CSD_STRUCTURE : Extended
13:17:57 : SPEC_VERS : Version 4.1/4.2/4.3
13:17:57 : TAAC : 13 ns
13:17:57 : TRAN_SPEED : 4000000 KHz
13:17:57 : READ_BL_LEN : 512 Bytes
13:17:57 : C_SIZE : HIGH CAPACITY
13:17:57 : WP_GRP_ENABLE : YES
13:17:57 : WRITE_BL_LEN : 512 Bytes
13:17:57 : CONTENT_PROT_APP : NO
13:17:57 : PERM_WRITE_PROTECT: NO
13:17:57 : TMP_WRITE_PROTECT : NO
13:17:57 :
13:17:57 : Extended CSD Saved:
13:17:57 : 1501004B3758564D4203831AD00EC0B3.ext_csd
13:17:57 : Backup Directory:
13:17:57 : C:\AdvanceBox Turbo Flasher\eMMC\EXT_CSD\
13:17:57 :
13:22:27 : ================================================== ====
13:22:27 : ================================================== ====
13:22:27 : eMMC Test Point Connection Module
13:22:27 : ================================================== ====
13:22:27 : ================================================== ====
13:22:27 :
13:22:27 : 1. DO NOT USE THE PHONE"S BATTERY
13:22:27 : 2. Connect the Soldered TP Connections to ATF Box
13:22:27 : 3. Disconnect the USB Cable and Wait until the
13:22:27 : the ATF Software will tell you to Connect the USB.
13:22:27 :
13:22:27 :
13:22:27 : Interface Reset OK!
13:22:27 : eMMC Access Type: SECTOR MODE
13:22:27 : eMMC Supported Voltage Range:
13:22:27 : 3.5-3.6V, 3.4-3.5V, 3.3-3.4V, 3.2-3.3V, 3.1-3.2V
3.0-3.1V, 2.9-3.0V, 2.8-2.9V, 2.7-2.8V, 1.9-2.0V
13:22:27 :
13:22:27 : CID : 1501004B3758564D4203831AD00EC0B3
13:22:27 : CSD : D02701320F5903FFF6DBFFEF8E40400D
13:22:27 :
13:22:27 : eMMC Boot Information
13:22:27 : Revision 1.6 (for MMC v4.5, v4.51)
13:22:27 : BOOT PARTITION : NOT BOOT ENABLED
13:22:27 : PARTITION ACCESS : R/W USER PARTITION
13:22:27 : PERM_BOOT_CFG_PROT : DISABLED
13:22:27 : PWR_BOOT_CFG_PROT : DISABLED
13:22:27 : BOOT MODE : x4 SINGLE DATA RATE + LOW SPEED
13:22:27 : RESET BUS WIDTH : ENABLED
13:22:27 : eMMC FirmW UPDATE : DISABLED
13:22:27 : EMMC CACHE SIZE : 0 KB
13:22:27 : SUPER PAGE SIZE : 3072 KB
13:22:27 : HC ERASE GROUP SIZE: 512 KB
13:22:27 : USER AREA SIZE : 7818182656 BYTES
13:22:27 : BOOT PARTITION SIZE: 4096 KB
13:22:27 : RPMB PARTITION SIZE: 512 KB
13:22:27 :
13:22:27 :
13:22:27 : eMMC Device Information
13:22:27 : Manufacturer ID: SAMSUNG
13:22:27 : Device Type : Embedded BGA
13:22:27 : Application ID : 00
13:22:27 : Product Name : K7XVMB
13:22:27 : Product Rev : 0.3
13:22:27 : Product SN : 831AD00E
13:22:27 : Manufactured : December 1997
13:22:27 :
13:22:27 : Card Specific Data
13:22:27 : CSD_STRUCTURE : Extended
13:22:27 : SPEC_VERS : Version 4.1/4.2/4.3
13:22:27 : TAAC : 13 ns
13:22:27 : TRAN_SPEED : 4000000 KHz
13:22:27 : READ_BL_LEN : 512 Bytes
13:22:27 : C_SIZE : HIGH CAPACITY
13:22:27 : WP_GRP_ENABLE : YES
13:22:27 : WRITE_BL_LEN : 512 Bytes
13:22:27 : CONTENT_PROT_APP : NO
13:22:27 : PERM_WRITE_PROTECT: NO
13:22:27 : TMP_WRITE_PROTECT : NO
13:22:27 :
13:22:27 : Extended CSD Saved:
13:22:27 : 1501004B3758564D4203831AD00EC0B3.ext_csd
13:22:27 : Backup Directory:
13:22:27 : C:\AdvanceBox Turbo Flasher\eMMC\EXT_CSD\
13:22:27 :
13:25:11 : ================================================== ====
13:25:11 : ================================================== ====
13:25:11 : eMMC Test Point Connection Module
13:25:11 : ================================================== ====
13:25:11 : ================================================== ====
13:25:11 :
13:25:11 : 1. DO NOT USE THE PHONE"S BATTERY
13:25:11 : 2. Connect the Soldered TP Connections to ATF Box
13:25:11 : 3. Disconnect the USB Cable and Wait until the
13:25:11 : the ATF Software will tell you to Connect the USB.
13:25:11 :
13:25:11 :
13:25:11 : Interface Reset OK!
13:25:11 : eMMC Access Type: SECTOR MODE
13:25:11 : eMMC Supported Voltage Range:
13:25:11 : 3.5-3.6V, 3.4-3.5V, 3.3-3.4V, 3.2-3.3V, 3.1-3.2V
3.0-3.1V, 2.9-3.0V, 2.8-2.9V, 2.7-2.8V, 1.9-2.0V
13:25:11 :
13:25:11 : CID : 1501004B3758564D4203831AD00EC0B3
13:25:11 : CSD : D02701320F5903FFF6DBFFEF8E40400D
13:25:11 :
13:25:11 : eMMC Boot Information
13:25:11 : Revision 1.6 (for MMC v4.5, v4.51)
13:25:11 : BOOT PARTITION : NOT BOOT ENABLED
13:25:11 : PARTITION ACCESS : R/W USER PARTITION
13:25:11 : PERM_BOOT_CFG_PROT : DISABLED
13:25:11 : PWR_BOOT_CFG_PROT : DISABLED
13:25:11 : BOOT MODE : x4 SINGLE DATA RATE + LOW SPEED
13:25:11 : RESET BUS WIDTH : ENABLED
13:25:11 : eMMC FirmW UPDATE : DISABLED
13:25:11 : EMMC CACHE SIZE : 0 KB
13:25:11 : SUPER PAGE SIZE : 3072 KB
13:25:11 : HC ERASE GROUP SIZE: 512 KB
13:25:11 : USER AREA SIZE : 7818182656 BYTES
13:25:11 : BOOT PARTITION SIZE: 4096 KB
13:25:11 : RPMB PARTITION SIZE: 512 KB
13:25:11 :
13:25:11 :
13:25:11 : eMMC Device Information
13:25:11 : Manufacturer ID: SAMSUNG
13:25:11 : Device Type : Embedded BGA
13:25:11 : Application ID : 00
13:25:11 : Product Name : K7XVMB
13:25:11 : Product Rev : 0.3
13:25:11 : Product SN : 831AD00E
13:25:11 : Manufactured : December 1997
13:25:11 :
13:25:11 : Card Specific Data
13:25:11 : CSD_STRUCTURE : Extended
13:25:11 : SPEC_VERS : Version 4.1/4.2/4.3
13:25:11 : TAAC : 13 ns
13:25:11 : TRAN_SPEED : 4000000 KHz
13:25:11 : READ_BL_LEN : 512 Bytes
13:25:11 : C_SIZE : HIGH CAPACITY
13:25:11 : WP_GRP_ENABLE : YES
13:25:11 : WRITE_BL_LEN : 512 Bytes
13:25:11 : CONTENT_PROT_APP : NO
13:25:11 : PERM_WRITE_PROTECT: NO
13:25:11 : TMP_WRITE_PROTECT : NO
13:25:11 :
13:25:11 : Extended CSD Saved:
13:25:11 : 1501004B3758564D4203831AD00EC0B3.ext_csd
13:25:11 : Backup Directory:
13:25:11 : C:\AdvanceBox Turbo Flasher\eMMC\EXT_CSD\
13:25:11 :
13:25:13 :
13:25:13 : Task Selected: Samsung eMMC Firmware Update
13:25:13 : ================================================== ====
13:25:13 : –> This will ERASE USER AREA, BOOT1, BOOT2, and RPMB
13:25:13 : –> This will RESET EXT_CSD Programming Such as BOOT
13:25:13 : Options, Bus Characteristics and Partition Sizes..
13:25:13 : ================================================== ====
13:25:13 :
13:25:13 : Please Manually Select the Correct
13:25:13 : Part Number of your eMMC Device.
13:25:13 :
13:25:13 : ================================================== ====
13:25:13 : If you select a WRONG PART NUMBER, then
13:25:13 : YOU WILL PROBABLY KILL THE EMMC !!!
13:25:13 : ================================================== ====
13:25:20 :
13:25:20 : ================================================== ====
13:25:20 : Loading ATF eMMC Firmware File… (Please Wait)
13:25:20 : ================================================== ====
13:25:20 :
13:25:20 :
13:25:28 : File Author: ATF Team @ edocomsel
13:25:28 : Date Created: 02/06/2015 (dd/mm/yyyy)
13:25:28 : Description: Samsung eMMC Firmware
13:25:28 : eMMC Part Number: KMK7X000VM-B314
13:25:28 : eMMC Product Name: K7XVMB
13:25:28 : eMMC Product Rev: 0.1
13:25:28 :
13:25:28 : Preparing eMMC for Firmware Update…
13:25:37 : Sending eMMC Firmware Blocks…
13:25:40 : All Blocks Sent!
13:25:40 : NAND Write Delay: 1 Second (Please Wait)
13:25:41 : Applying eMMC Firmware Update…
13:25:41 : Waiting for Device Re-Initialization…
13:25:41 : Firmware Write Protect Delay: 1 Second (Please Wait)
13:25:42 : Checking eMMC Firmware Update Status…
13:25:46 : Applying Final Patches…
13:25:46 : eMMC Firmware Update Successful!
13:25:46 :
13:25:46 :
13:25:46 : ================================================== ====
13:25:46 : Your eMMC is now a Brand New BLANK Device!!!
13:25:46 : ================================================== ====
13:25:46 : Resize BOOT and RPM Partitions if needed…
13:25:46 : ReWrite BOOT1, BOOT2 and USER Partitions if needed…
13:25:46 : ReWrite EXT_CSD File if needed…
13:25:46 : Make sure eMMC BOOT Options are Correct for your Phone
13:25:46 : ================================================== ====
13:25:46 :
13:25:46 : Total Elapsed Time 00:00:17
13:25:52 : ================================================== ====
13:25:52 : ================================================== ====
13:25:52 : eMMC Test Point Connection Module
13:25:52 : ================================================== ====
13:25:52 : ================================================== ====
13:25:52 :
13:25:52 : 1. DO NOT USE THE PHONE"S BATTERY
13:25:52 : 2. Connect the Soldered TP Connections to ATF Box
13:25:52 : 3. Disconnect the USB Cable and Wait until the
13:25:52 : the ATF Software will tell you to Connect the USB.
13:25:52 :
13:25:52 :
13:25:52 : Interface Reset OK!
13:25:52 : eMMC Access Type: SECTOR MODE
13:25:52 : eMMC Supported Voltage Range:
13:25:52 : 3.5-3.6V, 3.4-3.5V, 3.3-3.4V, 3.2-3.3V, 3.1-3.2V
3.0-3.1V, 2.9-3.0V, 2.8-2.9V, 2.7-2.8V, 1.9-2.0V
13:25:52 :
13:25:52 : CID : 1501004B3758564D30012400D00E8165
13:25:52 : CSD : D02701320F5903FFF6DBFFEF8E40400D
13:25:52 :
13:25:52 : eMMC Boot Information
13:25:52 : Revision 1.7 (for MMC v5.0, v5.01)
13:25:52 : BOOT PARTITION : NOT BOOT ENABLED
13:25:52 : PARTITION ACCESS : R/W USER PARTITION
13:25:52 : PERM_BOOT_CFG_PROT : DISABLED
13:25:52 : PWR_BOOT_CFG_PROT : DISABLED
13:25:52 : BOOT MODE : x1 SINGLE DATA RATE + LOW SPEED
13:25:52 : RESET BUS WIDTH : ENABLED
13:25:52 : eMMC FirmW UPDATE : DISABLED
13:25:52 : EMMC CACHE SIZE : 0 KB
13:25:52 : SUPER PAGE SIZE : 3072 KB
13:25:52 : HC ERASE GROUP SIZE: 512 KB
13:25:52 : USER AREA SIZE : 7818182656 BYTES
13:25:52 : BOOT PARTITION SIZE: 4096 KB
13:25:52 : RPMB PARTITION SIZE: 512 KB
13:25:52 :
13:25:52 :
13:25:52 : eMMC Device Information
13:25:52 : Manufacturer ID: SAMSUNG
13:25:52 : Device Type : Embedded BGA
13:25:52 : Application ID : 00
13:25:52 : Product Name : K7XVM0
13:25:52 : Product Rev : 0.1
13:25:52 : Product SN : 2400D00E
13:25:52 : Manufactured : January 1998
13:25:52 :
13:25:52 : Card Specific Data
13:25:52 : CSD_STRUCTURE : Extended
13:25:52 : SPEC_VERS : Version 4.1/4.2/4.3
13:25:52 : TAAC : 13 ns
13:25:52 : TRAN_SPEED : 4000000 KHz
13:25:52 : READ_BL_LEN : 512 Bytes
13:25:52 : C_SIZE : HIGH CAPACITY
13:25:52 : WP_GRP_ENABLE : YES
13:25:52 : WRITE_BL_LEN : 512 Bytes
13:25:52 : CONTENT_PROT_APP : NO
13:25:52 : PERM_WRITE_PROTECT: NO
13:25:52 : TMP_WRITE_PROTECT : NO
13:25:52 :
13:25:52 : Extended CSD Saved:
13:25:52 : 1501004B3758564D30012400D00E8165.ext_csd
13:25:52 : Backup Directory:
13:25:52 : C:\AdvanceBox Turbo Flasher\eMMC\EXT_CSD\
13:25:52 :
13:25:53 :
13:25:53 : Task Selected: Normal Factory Erase
13:25:53 : ================================================== ====
13:25:53 : For eMMC Revision 1.2 (for MMC v4.2) and LOWER
13:25:53 : –> This will ERASE USER AREA, BOOT1, BOOT2, and RPMB
13:25:53 : For eMMC Revision 1.3 (for MMC v4.3) and HIGHER
13:25:53 : –> This will ONLY ERASE USER AREA
13:25:53 : ================================================== ====
13:25:53 : This eMMC is: Revision 1.x (For MMC v4.x)
13:25:53 :
13:25:53 : Factory Erasing Supported FLASH AREA…
13:25:56 : Normal Factory Erase Done!
13:25:56 :
13:25:56 : ================================================== ====
13:25:56 : WARNING – WARNING – WARNING – WARNING – WARNING
13:25:56 : ================================================== ====
13:25:56 : 1. WRITE BOOT1 Image if Needed
13:25:56 : 2. WRITE BOOT2 Image if Needed
13:25:56 : 3. WRITE USER AREA Image if Needed
13:25:56 : ================================================== ====
13:26:03 : ================================================== ====
13:26:03 : ================================================== ====
13:26:03 : eMMC Test Point Connection Module
13:26:03 : ================================================== ====
13:26:03 : ================================================== ====
13:26:03 :
13:26:03 : 1. DO NOT USE THE PHONE"S BATTERY
13:26:03 : 2. Connect the Soldered TP Connections to ATF Box
13:26:03 : 3. Disconnect the USB Cable and Wait until the
13:26:03 : the ATF Software will tell you to Connect the USB.
13:26:03 :
13:26:03 :
13:26:03 : Interface Reset OK!
13:26:03 : eMMC Access Type: SECTOR MODE
13:26:03 : eMMC Supported Voltage Range:
13:26:03 : 3.5-3.6V, 3.4-3.5V, 3.3-3.4V, 3.2-3.3V, 3.1-3.2V
3.0-3.1V, 2.9-3.0V, 2.8-2.9V, 2.7-2.8V, 1.9-2.0V
13:26:03 :
13:26:03 : CID : 1501004B3758564D30012400D00E8165
13:26:03 : CSD : D02701320F5903FFF6DBFFEF8E40400D
13:26:03 :
13:26:03 : eMMC Boot Information
13:26:03 : Revision 1.7 (for MMC v5.0, v5.01)
13:26:03 : BOOT PARTITION : NOT BOOT ENABLED
13:26:03 : PARTITION ACCESS : R/W USER PARTITION
13:26:03 : PERM_BOOT_CFG_PROT : DISABLED
13:26:03 : PWR_BOOT_CFG_PROT : DISABLED
13:26:03 : BOOT MODE : x1 SINGLE DATA RATE + LOW SPEED
13:26:03 : RESET BUS WIDTH : ENABLED
13:26:03 : eMMC FirmW UPDATE : DISABLED
13:26:03 : EMMC CACHE SIZE : 0 KB
13:26:03 : SUPER PAGE SIZE : 3072 KB
13:26:03 : HC ERASE GROUP SIZE: 512 KB
13:26:03 : USER AREA SIZE : 7818182656 BYTES
13:26:03 : BOOT PARTITION SIZE: 4096 KB
13:26:03 : RPMB PARTITION SIZE: 512 KB
13:26:03 :
13:26:03 :
13:26:03 : eMMC Device Information
13:26:03 : Manufacturer ID: SAMSUNG
13:26:03 : Device Type : Embedded BGA
13:26:03 : Application ID : 00
13:26:03 : Product Name : K7XVM0
13:26:03 : Product Rev : 0.1
13:26:03 : Product SN : 2400D00E
13:26:03 : Manufactured : January 1998
13:26:03 :
13:26:03 : Card Specific Data
13:26:03 : CSD_STRUCTURE : Extended
13:26:03 : SPEC_VERS : Version 4.1/4.2/4.3
13:26:03 : TAAC : 13 ns
13:26:03 : TRAN_SPEED : 4000000 KHz
13:26:03 : READ_BL_LEN : 512 Bytes
13:26:03 : C_SIZE : HIGH CAPACITY
13:26:03 : WP_GRP_ENABLE : YES
13:26:03 : WRITE_BL_LEN : 512 Bytes
13:26:03 : CONTENT_PROT_APP : NO
13:26:03 : PERM_WRITE_PROTECT: NO
13:26:03 : TMP_WRITE_PROTECT : NO
13:26:03 :
13:26:03 : Extended CSD Saved:
13:26:03 : 1501004B3758564D30012400D00E8165.ext_csd
13:26:03 : Backup Directory:
13:26:03 : C:\AdvanceBox Turbo Flasher\eMMC\EXT_CSD\
13:26:03 :
13:26:04 :
13:26:04 : Task Selected: Samsung Factory Format
13:26:04 : ================================================== ====
13:26:04 : For eMMC Revision 1.5 (for MMC v4.41) and LOWER
13:26:04 : –> This will ERASE USER AREA, BOOT1, BOOT2, RPMB and EXT_CSD R/W/E Entries
13:26:04 : For eMMC Revision 1.6 (for MMC v4.5) and HIGHER
13:26:04 : –> This will ONLY ERASE USER AREA
13:26:04 : ================================================== ====
13:26:04 : This eMMC is: Revision 1.x (For MMC v4.x)
13:26:04 :
13:26:04 : Samsung Factory Format Start…
13:26:04 : Format Done!
13:26:04 :
13:26:04 : ================================================== ====
13:26:04 : WARNING – WARNING – WARNING – WARNING – WARNING
13:26:04 : ================================================== ====
13:26:04 : 1. WRITE Back EXT_CSD Backup if Needed
13:26:04 : 2. WRITE BOOT1 Image if Needed
13:26:04 : 3. WRITE BOOT2 Image if Needed
13:26:04 : 4. WRITE USER AREA Image if Needed
13:26:04 : ================================================== ====
13:26:08 : ================================================== ====
13:26:08 : ================================================== ====
13:26:08 : eMMC Test Point Connection Module
13:26:08 : ================================================== ====
13:26:08 : ================================================== ====
13:26:08 :
13:26:08 : 1. DO NOT USE THE PHONE"S BATTERY
13:26:08 : 2. Connect the Soldered TP Connections to ATF Box
13:26:08 : 3. Disconnect the USB Cable and Wait until the
13:26:08 : the ATF Software will tell you to Connect the USB.
13:26:08 :
13:26:08 :
13:26:08 : Interface Reset OK!
13:26:08 : eMMC Access Type: SECTOR MODE
13:26:08 : eMMC Supported Voltage Range:
13:26:08 : 3.5-3.6V, 3.4-3.5V, 3.3-3.4V, 3.2-3.3V, 3.1-3.2V
3.0-3.1V, 2.9-3.0V, 2.8-2.9V, 2.7-2.8V, 1.9-2.0V
13:26:08 :
13:26:08 : CID : 1501004B3758564D30012400D00E8165
13:26:08 : CSD : D02701320F5903FFF6DBFFEF8E40400D
13:26:08 :
13:26:08 : eMMC Boot Information
13:26:08 : Revision 1.7 (for MMC v5.0, v5.01)
13:26:08 : BOOT PARTITION : NOT BOOT ENABLED
13:26:08 : PARTITION ACCESS : R/W USER PARTITION
13:26:08 : PERM_BOOT_CFG_PROT : DISABLED
13:26:08 : PWR_BOOT_CFG_PROT : DISABLED
13:26:08 : BOOT MODE : x1 SINGLE DATA RATE + LOW SPEED
13:26:08 : RESET BUS WIDTH : ENABLED
13:26:08 : eMMC FirmW UPDATE : DISABLED
13:26:08 : EMMC CACHE SIZE : 0 KB
13:26:08 : SUPER PAGE SIZE : 3072 KB
13:26:08 : HC ERASE GROUP SIZE: 512 KB
13:26:08 : USER AREA SIZE : 7818182656 BYTES
13:26:08 : BOOT PARTITION SIZE: 4096 KB
13:26:08 : RPMB PARTITION SIZE: 512 KB
13:26:08 :
13:26:08 :
13:26:08 : eMMC Device Information
13:26:08 : Manufacturer ID: SAMSUNG
13:26:08 : Device Type : Embedded BGA
13:26:08 : Application ID : 00
13:26:08 : Product Name : K7XVM0
13:26:08 : Product Rev : 0.1
13:26:08 : Product SN : 2400D00E
13:26:08 : Manufactured : January 1998
13:26:08 :
13:26:08 : Card Specific Data
13:26:08 : CSD_STRUCTURE : Extended
13:26:08 : SPEC_VERS : Version 4.1/4.2/4.3
13:26:08 : TAAC : 13 ns
13:26:08 : TRAN_SPEED : 4000000 KHz
13:26:08 : READ_BL_LEN : 512 Bytes
13:26:08 : C_SIZE : HIGH CAPACITY
13:26:08 : WP_GRP_ENABLE : YES
13:26:08 : WRITE_BL_LEN : 512 Bytes
13:26:08 : CONTENT_PROT_APP : NO
13:26:08 : PERM_WRITE_PROTECT: NO
13:26:08 : TMP_WRITE_PROTECT : NO
13:26:08 :
13:26:08 : Extended CSD Saved:
13:26:08 : 1501004B3758564D30012400D00E8165.ext_csd
13:26:08 : Backup Directory:
13:26:08 : C:\AdvanceBox Turbo Flasher\eMMC\EXT_CSD\
13:26:08 :
13:26:13 : ================================================== ====
13:26:13 : ================================================== ====
13:26:13 : eMMC Test Point Connection Module
13:26:13 : ================================================== ====
13:26:13 : ================================================== ====
13:26:13 :
13:26:13 : 1. DO NOT USE THE PHONE"S BATTERY
13:26:13 : 2. Connect the Soldered TP Connections to ATF Box
13:26:13 : 3. Disconnect the USB Cable and Wait until the
13:26:13 : the ATF Software will tell you to Connect the USB.
13:26:13 :
13:26:13 :
13:26:13 : Interface Reset OK!
13:26:13 : eMMC Access Type: SECTOR MODE
13:26:13 : eMMC Supported Voltage Range:
13:26:13 : 3.5-3.6V, 3.4-3.5V, 3.3-3.4V, 3.2-3.3V, 3.1-3.2V
3.0-3.1V, 2.9-3.0V, 2.8-2.9V, 2.7-2.8V, 1.9-2.0V
13:26:13 :
13:26:13 : CID : 1501004B3758564D30012400D00E8165
13:26:13 : CSD : D02701320F5903FFF6DBFFEF8E40400D
13:26:13 :
13:26:13 : eMMC Boot Information
13:26:13 : Revision 1.7 (for MMC v5.0, v5.01)
13:26:13 : BOOT PARTITION : NOT BOOT ENABLED
13:26:13 : PARTITION ACCESS : R/W USER PARTITION
13:26:13 : PERM_BOOT_CFG_PROT : DISABLED
13:26:13 : PWR_BOOT_CFG_PROT : DISABLED
13:26:13 : BOOT MODE : x1 SINGLE DATA RATE + LOW SPEED
13:26:13 : RESET BUS WIDTH : ENABLED
13:26:13 : eMMC FirmW UPDATE : DISABLED
13:26:13 : EMMC CACHE SIZE : 0 KB
13:26:13 : SUPER PAGE SIZE : 3072 KB
13:26:13 : HC ERASE GROUP SIZE: 512 KB
13:26:13 : USER AREA SIZE : 7818182656 BYTES
13:26:13 : BOOT PARTITION SIZE: 4096 KB
13:26:13 : RPMB PARTITION SIZE: 512 KB
13:26:13 :
13:26:13 :
13:26:13 : eMMC Device Information
13:26:13 : Manufacturer ID: SAMSUNG
13:26:13 : Device Type : Embedded BGA
13:26:13 : Application ID : 00
13:26:13 : Product Name : K7XVM0
13:26:13 : Product Rev : 0.1
13:26:13 : Product SN : 2400D00E
13:26:13 : Manufactured : January 1998
13:26:13 :
13:26:13 : Card Specific Data
13:26:13 : CSD_STRUCTURE : Extended
13:26:13 : SPEC_VERS : Version 4.1/4.2/4.3
13:26:13 : TAAC : 13 ns
13:26:13 : TRAN_SPEED : 4000000 KHz
13:26:13 : READ_BL_LEN : 512 Bytes
13:26:13 : C_SIZE : HIGH CAPACITY
13:26:13 : WP_GRP_ENABLE : YES
13:26:13 : WRITE_BL_LEN : 512 Bytes
13:26:13 : CONTENT_PROT_APP : NO
13:26:13 : PERM_WRITE_PROTECT: NO
13:26:13 : TMP_WRITE_PROTECT : NO
13:26:13 :
13:26:13 : Extended CSD Saved:
13:26:13 : 1501004B3758564D30012400D00E8165.ext_csd
13:26:13 : Backup Directory:
13:26:13 : C:\AdvanceBox Turbo Flasher\eMMC\EXT_CSD\
13:26:13 :
13:26:26 :
13:26:26 : Task Selected: Write EXT_CSD Backup
13:26:26 : Task Done!