Samsung J700f emmc write error-need help

Code:

======================================================
======================================================
      eMMC Test Point Connection Module           
======================================================
======================================================
                                                     
1. DO NOT USE THE PHONE"S BATTERY                   
2. Connect the Soldered TP Connections to ATF Box   
3. Disconnect the USB Cable and Wait until the       
  the ATF Software will tell you to Connect the USB.
                                                     

Interface Reset OK!
eMMC Access Type: SECTOR MODE
eMMC Supported Voltage Range:
3.5-3.6V, 3.4-3.5V, 3.3-3.4V, 3.2-3.3V, 3.1-3.2V
3.0-3.1V, 2.9-3.0V, 2.8-2.9V, 2.7-2.8V, 1.9-2.0V

CID : 1101003430303037330068C8C381627F
CSD : D07E00320F5903FFFFFFFFE78A4000D1

eMMC Boot Information
Revision 1.7 (for MMC v5.0, v5.01)
BOOT PARTITION    : BOOT PARTITION 1
PARTITION ACCESS  : R/W USER PARTITION
PERM_BOOT_CFG_PROT : DISABLED
PWR_BOOT_CFG_PROT  : DISABLED
BOOT MODE          : x4 SINGLE DATA RATE + LOW SPEED
RESET BUS WIDTH    : ENABLED
eMMC FirmW UPDATE  : DISABLED
EMMC CACHE SIZE    : 0 KB
SUPER PAGE SIZE    : 4096 KB
HC ERASE GROUP SIZE: 4096 KB
USER AREA SIZE    : 15758000128 BYTES
BOOT PARTITION SIZE: 4096 KB
RPMB PARTITION SIZE: 4096 KB

eMMC Device Information
Manufacturer ID: TOSHIBA
Device Type    : Embedded BGA
Application ID : 00
Product Name  : 400073
Product Rev    : 0.0
Product SN    : 68C8C381
Manufactured  : January 1999

Card Specific Data
CSD_STRUCTURE    : Extended
SPEC_VERS        : Version 4.1/4.2/4.3
TAAC              : 8000 ns
TRAN_SPEED        : 4000000 KHz
READ_BL_LEN      : 512 Bytes
C_SIZE            : HIGH CAPACITY
WP_GRP_ENABLE    : YES
WRITE_BL_LEN      : 512 Bytes
CONTENT_PROT_APP  : NO
PERM_WRITE_PROTECT: NO
TMP_WRITE_PROTECT : NO

Extended CSD Saved:
1101003430303037330068C8C381627F.ext_csd
Backup Directory:
C:\AdvanceBox Turbo Flasher\eMMC\EXT_CSD\

ERROR: eMMC Read Failed
eMMC Write WILL NOT CONTINUE...