SPD 6531A IMEI Repair DONE

Important Notes

1. You need to cut V-charge voltage to mobile

— Just remove V-charge Pin from PCB or, Cut 5V wire inside data cable. *I did the first procedure–

2. Tick rebuild, Auto Chksum and 8830/10/6815/6531.

3. Enter IMEI.

4. Make sure SPD drivers are installed. — If not install from miracle driver support file —

5. Start, and connect phone switched off with battery inserted

6. Wait till process completes– Done:)

**Don’t forget to re-solder the V-charge pin

— Handset repaired – Lava Arc12i —