SPH-L720T DEAD BOOT not work

Install L720 On L720T android 5 By Mistake but L720T Go DEAD

I try To REPAIR BY OCTOPLUS , All DONE BUT NOT REPAIRED

NO HARDWARE FAULT ANYMORE, JUST FLASHING L720 Goo DEAD:
THIS LOG:

Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S256 revision C.
Detected TAP ID: 4BA00477, IR Length = 4.
Detected TAP ID: 2071B0E1, IR Length = 11.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S256 revision C.
MI: Halting target, attempt 1.
JTAG speed : 1000 KHz.
VREF level : 1.80 V
CPU : Qualcomm APQ8064T
Core ID : 2071B0E1
MI: Loading Medusa Device Server V1.2.
MI: Starting…
MI: Received status 0x0000F00F, cycle 0.
MI: Received server capabilities 0x00000191.
MI: Detailed server caps: FLASH, WDOG, A64, IOCTL
MI: Watchdog configuration: 0xB800010C, 0x00000001… ok
MI: Server init.
MI: Received flash ID 0xE0110001.
MI: Flash geometry set.
MI: Recheking settings… ok
Server caps : 00000191
Storage Device: Unknown eMMC 016G94
Device ID : 00110001
Block size : 512 bytes
Blocks : 30777344
Storage size : 14.7 Gb
Opening "C:\Users\Eng.Salman\Downloads\Compressed\SAMSUNG_ SPHL720T_Repair.mf\SAMSUNG_SPHL720T_Repair.mf" file…
Writing BOOT section. Please wait… Done
Writing RECOVERY section. Please wait… Done
Disconnected
ANY SOLUTION ??