the firmware update + format step is right??


I found phone (Lenovo A516) my friend died suddenly.
I have bought atf jtag 2 days ago, i try to update firmware and format.
Here is the log :
eMMC Test Point Connection Module
================================================== ====
================================================== ====

1. DO NOT USE THE PHONE"S BATTERY
2. Connect the Soldered TP Connections to ATF Box
3. Disconnect the USB Cable and Wait until the
the ATF Software will tell you to Connect the USB.

Interface Reset OK!
eMMC Access Type: SECTOR MODE
eMMC Supported Voltage Range:
3.5-3.6V, 3.4-3.5V, 3.3-3.4V, 3.2-3.3V, 3.1-3.2V
3.0-3.1V, 2.9-3.0V, 2.8-2.9V, 2.7-2.8V, 1.9-2.0V

CID : 1501004E355530304D00342064924F91
CSD : D02701320F5903FFF6DBFFE78A404057

eMMC Boot Information
Revision 1.5 (for MMC v4.41)
BOOT PARTITION : BOOT PARTITION 1
PARTITION ACCESS : R/W USER PARTITION
PERM_BOOT_CFG_PROT : DISABLED
PWR_BOOT_CFG_PROT : DISABLED
BOOT MODE : x1 SINGLE DATA RATE + LOW SPEED
RESET BUS WIDTH : ENABLED
eMMC FirmW UPDATE : DISABLED
EMMC CACHE SIZE : 0 KB
SUPER PAGE SIZE : 2560 KB
HC ERASE GROUP SIZE: 512 KB
USER AREA SIZE : 3896508416 BYTES
BOOT PARTITION SIZE: 2048 KB
RPMB PARTITION SIZE: 2048 KB

eMMC Device Information
Manufacturer ID: SAMSUNG
Device Type : Embedded BGA
Application ID : 00
Product Name : N5U00M
Product Rev : 0.0
Product SN : 34206492
Manufactured : January 2012

Card Specific Data
CSD_STRUCTURE : Extended
SPEC_VERS : Version 4.1/4.2/4.3
TAAC : 13 ns
TRAN_SPEED : 4000000 KHz
READ_BL_LEN : 512 Bytes
C_SIZE : HIGH CAPACITY
WP_GRP_ENABLE : YES
WRITE_BL_LEN : 512 Bytes
CONTENT_PROT_APP : NO
PERM_WRITE_PROTECT: NO
TMP_WRITE_PROTECT : NO

Extended CSD Saved:
1501004E355530304D00342064924F91.ext_csd
Backup Directory:
C:\AdvanceBox Turbo Flasher\eMMC\EXT_CSD\

Task Selected: Samsung eMMC Firmware Update
================================================== ====
–> This will ERASE USER AREA, BOOT1, BOOT2, and RPMB
–> This will RESET EXT_CSD Programming Such as BOOT
Options, Bus Characteristics and Partition Sizes..
================================================== ====

Please Manually Select the Correct
Part Number of your eMMC Device.

================================================== ====
If you select a WRONG PART NUMBER, then
YOU WILL PROBABLY KILL THE EMMC !!!
================================================== ====

================================================== ====
Loading ATF eMMC Firmware File… (Please Wait)
================================================== ====

File Author: ATF Team @ X-Shadow
Date Created: 21/02/2015 (dd/mm/yyyy)
Description: Samsung eMMC Firmware
eMMC Part Number: KMNJS000ZM-B205
eMMC Product Name: NJS00M
eMMC Product Rev: 0.0

Preparing eMMC for Firmware Update…
Sending eMMC Firmware Blocks…
All Blocks Sent!
NAND Write Delay: 1 Second (Please Wait)
Applying eMMC Firmware Update…
Waiting for Device Re-Initialization…
Firmware Write Protect Delay: 1 Second (Please Wait)
Checking eMMC Firmware Update Status…
Applying Final Patches…
eMMC Firmware Update Successful!

================================================== ====
Your eMMC is now a Brand New BLANK Device!!!
================================================== ====
Resize BOOT and RPM Partitions if needed…
ReWrite BOOT1, BOOT2 and USER Partitions if needed…
ReWrite EXT_CSD File if needed…
Make sure eMMC BOOT Options are Correct for your Phone
================================================== ====

Total Elapsed Time 00:01:02

What sholud I do next???
ItÂ’s done or the other next step ???