Writing BOOT ERROR[018] n7000

Welcome to Octoplus JTAG Box Software version 1.9.5
Selected device model: Samsung GT-N7000
Connecting. Please wait…
Checking data…
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S256 revision C.
Detected TAP ID: 4BA00477, IR Length = 4.
JTAG speed : 8000 KHz.
VREF level : 2.78 V
CPU : Samsung S5PC210
Core ID : 4BA00477
ERROR[002]: Failed to load Medusa Device Server to target RAM.
ERROR[035]: Target device has been powered off during connect.
Please connect the target device and power it on…
Checking data…
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S256 revision C.
Detected TAP ID: 4BA00477, IR Length = 4.
JTAG speed : 8000 KHz.
VREF level : 2.76 V
CPU : Samsung S5PC210
Core ID : 4BA00477
Storage Device: Samsung eMMC VYL00M
Device ID : 00150001
Block size : 512 bytes
Blocks : 30777344
Storage size : 14.7 Gb
Opening "C:\Users\gsmalaa\Desktop\SAMSUNG_GTN7000_Repair.m f" file…
Writing BOOT section. Please wait…
ERROR[018]: Logical block operation failed at 16 Kb (Hex address 0x00004000). Reason: Command failed.
Checking data…
VREF = 0.0V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S256 revision C.
Detected TAP ID: 4BA00477, IR Length = 4.
JTAG speed : 8000 KHz.
VREF level : 2.78 V
CPU : Samsung S5PC210
Core ID : 4BA00477
Storage Device: Samsung eMMC VYL00M
Device ID : 00150001
Block size : 512 bytes
Blocks : 30777344
Storage size : 14.7 Gb
Opening "C:\Users\gsmalaa\Desktop\SAMSUNG_GTN7000_Repair.m f" file…
Writing BOOT section. Please wait…
ERROR[018]: Logical block operation failed at 16 Kb (Hex address 0x00004000). Reason: Command failed.
Checking data…
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S256 revision C.
Detected TAP ID: 4BA00477, IR Length = 4.
JTAG speed : 8000 KHz.
VREF level : 2.78 V
CPU : Samsung S5PC210
Core ID : 4BA00477
Storage Device: Samsung eMMC VYL00M
Device ID : 00150001
Block size : 512 bytes
Blocks : 30777344
Storage size : 14.7 Gb
Opening "C:\Users\gsmalaa\Desktop\SAMSUNG_GTN7000_Repair.m f" file…
Writing BOOT section. Please wait…
ERROR[018]: Logical block operation failed at 16 Kb (Hex address 0x00004000). Reason: Command failed.
Selected device model: Samsung GT-N7000
Connecting. Please wait…
Checking data…
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S256 revision C.
Detected TAP ID: 4BA00477, IR Length = 4.
JTAG speed : 1000 KHz.
VREF level : 2.78 V
CPU : Samsung S5PC210
Core ID : 4BA00477
Storage Device: Samsung eMMC VYL00M
Device ID : 00150001
Block size : 512 bytes
Blocks : 30777344
Storage size : 14.7 Gb
Opening "C:\Users\gsmalaa\Desktop\SAMSUNG_GTN7000_Repair.m f" file…
Writing BOOT section. Please wait…
ERROR[018]: Logical block operation failed at 16 Kb (Hex address 0x00004000). Reason: Command failed.
Selected device model: Samsung GT-N7000
Connecting. Please wait…
Checking data…
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S256 revision C.
Detected TAP ID: 4BA00477, IR Length = 4.
ERROR[000]: Unable to halt core.
Please connect the target device and power it on…
Checking data…
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S256 revision C.
Detected TAP ID: 4BA00477, IR Length = 4.
ERROR[000]: Unable to halt core.
Checking data…
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S256 revision C.
Detected TAP ID: 4BA00477, IR Length = 4.
ERROR[000]: Unable to halt core.
Checking data…
VREF = 0.0V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S256 revision C.
Detected TAP ID: 4BA00477, IR Length = 4.
ERROR[000]: Unable to halt core.
Please connect the target device and power it on…
Checking data…
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S256 revision C.
Detected TAP ID: 4BA00477, IR Length = 4.
ERROR[000]: Unable to halt core.
Checking data…
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S256 revision C.
Detected TAP ID: 4BA00477, IR Length = 4.
ERROR[000]: Unable to halt core.
Selected device model: Samsung GT-N7000
Connecting. Please wait…
Checking data…
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S256 revision C.
Detected TAP ID: 4BA00477, IR Length = 4.
JTAG speed : 1000 KHz.
VREF level : 2.78 V
CPU : Samsung S5PC210
Core ID : 4BA00477
Storage Device: Samsung eMMC VYL00M
Device ID : 00150001
Block size : 512 bytes
Blocks : 30777344
Storage size : 14.7 Gb
Opening "C:\Users\gsmalaa\Desktop\SAMSUNG_GTN7000_Repair.m f" file…
Writing BOOT section. Please wait…
ERROR[018]: Logical block operation failed at 16 Kb (Hex address 0x00004000). Reason: Command failed.
Checking data…
VREF = 0.0V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S256 revision C.
Detected TAP ID: 4BA00477, IR Length = 4.
JTAG speed : 1000 KHz.
VREF level : 2.73 V
CPU : Samsung S5PC210
Core ID : 4BA00477
ERROR[002]: Failed to load Medusa Device Server to target RAM.
Please connect the target device and power it on…
Checking data…
VREF = 2.73V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S256 revision C.
Detected TAP ID: 4BA00477, IR Length = 4.
JTAG speed : 1000 KHz.
VREF level : 2.75 V
CPU : Samsung S5PC210
Core ID : 4BA00477
Storage Device: Samsung eMMC VYL00M
Device ID : 00150001
Block size : 512 bytes
Blocks : 30777344
Storage size : 14.7 Gb
Opening "C:\Users\gsmalaa\Desktop\SAMSUNG_GTN7000_Repair.m f" file…
Writing BOOT section. Please wait…
ERROR[018]: Logical block operation failed at 16 Kb (Hex address 0x00004000). Reason: Command failed.
Checking data…
VREF = 2.73V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S256 revision C.
Detected TAP ID: 4BA00477, IR Length = 4.
JTAG speed : 1000 KHz.
VREF level : 2.80 V
CPU : Samsung S5PC210
Core ID : 4BA00477
Storage Device: Samsung eMMC VYL00M
Device ID : 00150001
Block size : 512 bytes
Blocks : 30777344
Storage size : 14.7 Gb
Opening "C:\Users\gsmalaa\Desktop\SAMSUNG_GTN7000_Repair.m f" file…
Writing BOOT section. Please wait…
ERROR[018]: Logical block operation failed at 16 Kb (Hex address 0x00004000). Reason: Command failed.
Selected device model: Samsung GT-N7000
Connecting. Please wait…
Checking data…
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S256 revision C.
Detected TAP ID: 4BA00477, IR Length = 4.
JTAG speed : 1000 KHz.
VREF level : 2.81 V
CPU : Samsung S5PC210
Core ID : 4BA00477
Storage Device: Samsung eMMC VYL00M
Device ID : 00150001
Block size : 512 bytes
Blocks : 30777344
Storage size : 14.7 Gb
Connect successful.
Opening "C:\Users\gsmalaa\Desktop\Samsung_GT-N7000_Custom_1Gb.bin\Samsung N7000 1Gb.bin" file…
Writing BOOT section. Please wait…
ERROR[018]: Logical block operation failed at 31 Kb (Hex address 0x00007E00). Reason: Command failed.
Disconnected
Selected device model: Samsung GT-N7000
Connecting. Please wait…
Checking data…
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S256 revision C.
Detected TAP ID: 4BA00477, IR Length = 4.
JTAG speed : 1000 KHz.
VREF level : 2.81 V
CPU : Samsung S5PC210
Core ID : 4BA00477
Storage Device: Samsung eMMC VYL00M
Device ID : 00150001
Block size : 512 bytes
Blocks : 30777344
Storage size : 14.7 Gb
Connect successful.
Opening "C:\Users\gsmalaa\Desktop\Samsung_GT-N7000_Custom_1Gb.bin\Samsung N7000 1Gb.bin" file…
Writing BOOT section. Please wait…
ERROR[018]: Logical block operation failed at 16 Kb (Hex address 0x00004000). Reason: Command failed.
Disconnected
Selected device model: Samsung GT-N7000
Connecting. Please wait…
Checking data…
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S256 revision C.
Detected TAP ID: 4BA00477, IR Length = 4.
JTAG speed : 1000 KHz.
VREF level : 2.81 V
CPU : Samsung S5PC210
Core ID : 4BA00477
Storage Device: Samsung eMMC VYL00M
Device ID : 00150001
Block size : 512 bytes
Blocks : 30777344
Storage size : 14.7 Gb
Connect successful.
Opening "C:\Users\gsmalaa\Desktop\Samsung_GT-N7000_Custom_1Gb.bin\Samsung N7000 1Gb.bin" file…
Writing CUSTOM section. Please wait…
ERROR[018]: Logical block operation failed at 16 Kb (Hex address 0x00004000). Reason: Command failed.
Disconnected
Selected device model: Samsung GT-N7000
Connecting. Please wait…
Checking data…
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S256 revision C.
Detected TAP ID: 4BA00477, IR Length = 4.
JTAG speed : 1000 KHz.
VREF level : 2.81 V
CPU : Samsung S5PC210
Core ID : 4BA00477
Storage Device: Samsung eMMC VYL00M
Device ID : 00150001
Block size : 512 bytes
Blocks : 30777344
Storage size : 14.7 Gb
Connect successful.
Disconnected
Selected device model: Samsung GT-N7000
Connecting. Please wait…
Checking data…
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S256 revision C.
Detected TAP ID: 4BA00477, IR Length = 4.
JTAG speed : 1000 KHz.
VREF level : 2.81 V
CPU : Samsung S5PC210
Core ID : 4BA00477
Storage Device: Samsung eMMC VYL00M
Device ID : 00150001
Block size : 512 bytes
Blocks : 30777344
Storage size : 14.7 Gb
Opening "C:\Users\gsmalaa\Desktop\SAMSUNG_GTN7000_Repair.m f" file…
Writing BOOT section. Please wait…
ERROR[018]: Logical block operation failed at 16 Kb (Hex address 0x00004000). Reason: Command failed.
Checking data…
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S256 revision C.
Detected TAP ID: 4BA00477, IR Length = 4.
JTAG speed : 1000 KHz.
VREF level : 2.81 V
CPU : Samsung S5PC210
Core ID : 4BA00477
Storage Device: Samsung eMMC VYL00M
Device ID : 00150001
Block size : 512 bytes
Blocks : 30777344
Storage size : 14.7 Gb
Opening "C:\Users\gsmalaa\Desktop\SAMSUNG_GTN7000_Repair.m f" file…
Writing BOOT section. Please wait…
ERROR[018]: Logical block operation failed at 16 Kb (Hex address 0x00004000). Reason: Command failed.
Checking data…
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S256 revision C.
Detected TAP ID: 4BA00477, IR Length = 4.
JTAG speed : 1000 KHz.
VREF level : 2.81 V
CPU : Samsung S5PC210
Core ID : 4BA00477
Storage Device: Samsung eMMC VYL00M
Device ID : 00150001
Block size : 512 bytes
Blocks : 30777344
Storage size : 14.7 Gb
Opening "C:\Users\gsmalaa\Desktop\SAMSUNG_GTN7000_Repair.m f" file…
Writing BOOT section. Please wait…
ERROR[018]: Logical block operation failed at 16 Kb (Hex address 0x00004000). Reason: Command failed.