X2 flash failed


have X2 with condition galery not open.
try flashing but gget error like this:

Card found: S/N : 0175986E , v0122
Registered to: alex

Connect phone on selected interface…

Core : v2.21 , NXP FlashEngine : v5.2

Flash Mode : Full Update (System, User, Boot)
Check and select files according selected FlashMode

Ok, Set : rm1013_2.1.0.12_059V786_001_rawprogram_unsparse_ui .xml
Ok, Set : rm1013_2.1.0.12_user_prog_emmc_firehose_8x10.mbn

Dead Mode is Selected
1. Phone should be Off!
2. Press and hold ‘Volume Down’ button
3. Insert USB cable and hold button, until phone will be detected

[FireHose_Error] : Phone not detected in any supported mode. Check Drivers, Cable, Battery

Flash Error
Break flashing!

Connect phone on selected interface…

Core : v2.21 , NXP FlashEngine : v5.2

Flash Mode : Full Update (System, User, Boot)
Check and select files according selected FlashMode

Ok, Set : rm1013_2.1.0.12_059V786_001_rawprogram_unsparse_ui .xml
Ok, Set : rm1013_2.1.0.12_user_prog_emmc_firehose_8x10.mbn

Dead Mode is Selected
1. Phone should be Off!
2. Press and hold ‘Volume Down’ button
3. Insert USB cable and hold button, until phone will be detected

[FireHose_Error] : Phone not detected in any supported mode. Check Drivers, Cable, Battery

Flash Error
Break flashing!

Connect phone on selected interface…

Core : v2.21 , NXP FlashEngine : v5.2

Flash Mode : Full Update (System, User, Boot)
Check and select files according selected FlashMode

Ok, Set : rm1013_2.1.0.12_059V786_001_rawprogram_unsparse_ui .xml
Ok, Set : rm1013_2.1.0.12_user_prog_emmc_firehose_8x10.mbn

Dead Mode is Selected
1. Phone should be Off!
2. Press and hold ‘Volume Down’ button
3. Insert USB cable and hold button, until phone will be detected

[FireHose_Error] : Phone not detected in any supported mode. Check Drivers, Cable, Battery

Flash Error
Break flashing!

Connect phone on selected interface…

Core : v2.21 , NXP FlashEngine : v5.2

Flash Mode : Full Update (System, User, Boot)
Check and select files according selected FlashMode

Ok, Set : rm1013_2.1.0.12_059V786_001_rawprogram_unsparse_ui .xml
Ok, Set : rm1013_2.1.0.12_user_prog_emmc_firehose_8x10.mbn

Dead Mode is Selected
1. Phone should be Off!
2. Press and hold ‘Volume Down’ button
3. Insert USB cable and hold button, until phone will be detected

[FireHose_Error] : Phone not detected in any supported mode. Check Drivers, Cable, Battery

Flash Error
Break flashing!

Connect phone on selected interface…

and now in device manager detected Qualcom HS-USB QDLoader 9008

how to fix it?