Z3x ADB tab missing G900p

trying to read SPC

and noticed ADb tab is missing and getting this error

Direct Unlock:
1. Phone must be powered on.
2. Type *#0808# and select ‘DM+MODEM+ADB’.
3. Type *#9090# and choose ‘DM/DUN over HSIC’.
4. Reboot phone.
Or use ‘Activate Diag’ function from ‘Repair’ tab.
5. Connect USB cable, install drivers if needed.
6. Select Samsung diagnostic port in port settings.
7. Press ‘Unlock’ button.

Domestic Unlock:
1. Power on the phone.
2. Enable ‘USB debugging’ in ‘Settings’-‘Developer options’,
tap 7 times on ‘Build number’ in ‘Settings’-‘About phone’ to enable ‘Developer options’.
3. Connect the phone to PC with USB cable, install drivers if needed.
5. Select device in ADB settings.
6. Press ‘Unlock Domestic’ button.

Operation: Read SPC
Selected model: SM-G900P
Selected port: COM3 Z3X BOX Serial Port
Software version: 23.9

ADB device not selected

Done with Samsung Tool PRO v.23.9


  • adb device not connected in samsung phones by using z3x
  • adb device not selected z3x
  • how to select adb device z3x box
  • samsung adb devices z3x box
  • samsung ms-g900p
  • samsung z3xadb driver